News
faq
Product launches, events and updates from FlyingVoice.
FIP16/FIP16Plus Roaming Test Guide
FIP16/FIP16Plus supports IEEE802.11K/R Fast Roaming, which allows you to walk around when you are in a conversation and without interruption. This guide will tell us how to test this feature. E quipment Re quired 1. Two Access Points (AP-1 and AP-2) 2. Two IP Phones (FIP16-1 and FIP16-2) K ey P…
Read more →FIP16/FIP16Plus roaming test guide
FIP16/FIP16Plus supports IEEE802.11K/R Fast Roaming, allowing you to walk during a call without interruption. This guide will explain how to test this feature. Required equipment 1. Two access points (AP-1 and AP-2) 2. Two IP phones (FIP16-1 and FIP16-2) Key Point for roaming 1. The SSID (Wi‑Fi network name) is the same. 2. Wireless encryption type…
Read more →FIP16/FIP16Plus roaming test guide
The FIP16/FIP16Plus supports IEEE802.11K/R Fast Roaming, allowing you to move during a conversation without interruption. This guide explains how to test this feature. Required equipment 1. Two access points (AP‑1 and AP‑2) 2. Two SIP phones (FIP16-1 and…
Read more →How to capture packet on the Flyingvoice phone?
When there’s something wrong with the IP phones, we’re supposed to capture SIP packets to analyze the issue and figure it out. For example, when the phone failed to register to the PBX server, when the phone can’t make calls or receive calls. Applicable model: All the Flyingvoice phones 1. Log in…
Read more →كيفية التقاط الحزمة على هاتف Flyingvoice؟
When an issue occurs with IP phones, we need to capture SIP packets to analyze the problem and identify the cause. For example, when the phone fails to register with the PBX server, or when the phone cannot make or receive calls. The applicable model: all Flyingvoice phones. 1. Log in to the phone management page. Enter the IP address…
Read more →Comment capturer les paquets sur le téléphone Flyingvoice ?
When there’s something wrong with the IP phones, we’re supposed to capture SIP packets to analyze the issue and figure it out. For example, when the phone failed to register to the PBX server, when the phone can’t make calls or receive calls. Applicable model: All Flyingvoice phones 1.…
Read more →How to Upgrade the Firmware on the Flyingvoice phone?
This article will guide you to upgrade the firmware on the Flyingvoice phone step by step. First of all, please connect the phone and computer to a network, and make sure the connectivity is fine. The network topology as follows. 1. Log into the phone’s management page with the phone’s IP address.…
Read more →How to upgrade the firmware on a Flyingvoice phone?
This article will guide you through upgrading the firmware on a Flyingvoice phone step by step. First, please connect the phone and computer to the network, and ensure the connection is correct. The network diagram is as follows. 1. Log in to the phone management page using its IP address. Then check the hardware version of the phone and the firmware version…
Read more →How to update the Flyingvoice phone firmware?
This article will guide you to update the firmware of the Flyingvoice phone step by step. First, please connect the phone and computer to a network, and ensure the connectivity is correct. The network topology is as follows: 1. Connect to the page of…
Read more →How to set up the Flyingvoice Adapter to work with a Fax machine?
Physical Connection 1. Connect the adapter’s WAN port to the router/switch to access the internet. 2. Connect the adapter’s FXS port or PHONE port to the fax machine with a telephone line. 3. Connect the adapter’s LAN port to the computer with an Ethernet cable. Parameters Configuration…
Read more →How to set up a Flyingvoice adapter to work with a fax machine?
Physical connection 1. Connect the WAN adapter port to the router/switch to access the Internet. 2. Connect the FXS adapter port or phone port to the fax device with a phone line. 3. Connect the LAN adapter port to the computer using an Ethernet cable. Configure parameters before setting up fax settings; please ensure the SIP account for the adapter is registered successfully…
Read more →How to configure the Flyingvoice adapter to work with a fax machine?
Physical connection 1. Connect the WAN port adapter to the router / wizard to access the Internet. 2. Connect the FXS port adapter or TELEPHONE port adapter to the fax machine with a telephone line. 3. Connect the LAN port adapter to the computer with an Ethernet cable.…
Read more →What AP models are compatible with FIP1X Series IP phones?
The following AP models have completed the compatibility tests: ID Vendor Model Recommended phone software version 1 Ruijie RG-AP720-A V0.6.28.1 and above 2 H3C A61、WA4320-ACN-C V0.6.28.1 and above 3 HUAWEI AP3030DN V0.6.28.1 and above 4 Cisco AIR-AP1832I-H-K9 V0.6.28.1 and above 5 UBNT UAP‑AC‑PRO…
Read more →Which AP models are compatible with FIP1X IP phone series?
The following AP models passed compatibility tests: ID Vendor Model Release Phone firmware recommended 1 Ruijie RG-AP720-A Release V0.6.28.1 and above 2 H3C A61, WA4320-ACN-C Release V0.6.28.1 and above 3 HUAWEI AP3030DN Release V0.6.28.1 and above 4 Cisco AIR-AP1832I-H-K9 Release V0.6.28.1 and above 5 UBNT UAP‑AC‑PRO…
Read more →Which AP models are compatible with the FIP1X Series SIP phones?
The following access point models have passed compatibility tests: Supplier ID Model Software version recommended 1 Ruijie RG-AP720-A V0.6.28.1 and above 2 H3C A61, WA4320-ACN-C V0.6.28.1 and above 3 HUAWEI AP3030DN V0.6.28.1 and above 4 Cisco…
Read more →How to enable PRACK?
Login to the web GUI, go into “FXS - SIP-- advanced” page, enable SIP 100REL, click Save button and restart the device. Note: The parameter PRACK in the new version is changed to enable SIP 100REL. Test Result PRACK is generally a confirmation of the 183 call in progress / 180 ringing received. The…
Read more →كيفية تمكين PRACK؟
Log in to the web GUI, go to the “FXS – SIP – advanced” page, enable SIP 100REL, click Save and reboot the device. Note: The PRACK parameter was changed in the new version to enable SIP 100REL. In testing, PRACK is usually a confirmation for the 183 in‑progress / 180 ringing received. The INVITE call initiated by…
Read more →How to enable PRACK?
Connect to the Web interface, go to the "FXS - SIP-- advanced" page, enable SIP 100REL, click the Save button and restart the device. Note: the PRACK setting in the new version is changed to enable SIP 100REL. The PRACK test result is usually a…
Read more →How the ATA turn on polarity reversal?
Login web GUI,go into“FXS-- Preferences-- Miscellaneous”page,Enable Polarity Reversal Application scenarios: Polarity (telephone line A, B line is positive and negative) reversed, as to when to reverse: 1. called off hook 2. the end of the call ,hang up. Polarity reversal will produce a pulse, so…
Read more →كيف تقوم ATA بتفعيل عكس القطبية؟
Log in to the GUI web interface, go to the “FXS – Preferences – Miscellaneous” page, enable reverse polarity scenarios: reverse polarity (Line A positive and Line B negative), and it is also reversed when: 1. The speaker is lifted 2. Call ends, put the phone on the track. Reverse polarity will cause a pulse, allowing the recorder to record…
Read more →How does the ATA enable polarity inversion?
Log in to the web interface, go to the "FXS → Preferences → Miscellaneous" page, enable polarity inversion. Application scenarios: polarity (telephone line A, line B positive and negative) inverted, when to invert: 1. on hook 2. end of call, off hook. A polarity inversion…
Read more →How to use port group?
Login web GUI, go into “SIP Account – Port Group” page to configure port group. 1. Port Group Enable: select SIP Server 2. Port Select: it has many modes, including All, Ascending, Cycle Ascending, Descending, Cycle Descending. All: When there is a call, the two FXS mouths ring at the same time, you can…
Read more →كيفية استخدام مجموعة المنافذ؟
Log in to the web GUI interface, go to the “SIP Account-- Port Group” page to configure the port group. 1. Enable the port group: select SIP server 2. Select the port: it has many modes, including All, Ascending, Cycle Ascending, Descending, Cycle Descending. All: when there is a call, the port rings…
Read more →How to use the port group?
Connect to the Web interface, go to "SIP Account-- Port Group" to configure the port group. 1. Activate the port group: select the SIP server 2.Port Select: it has many modes, including All, Ascending, Ascending Cycle, Descending, Descending Cycle. All:…
Read more →