Physical Connection
1. Connect the adapter WAN port to the router/ssorcière to access the Internet.
2. Connect the adapter FXS port or PHONE port to the fax machine with a telephone line.
3. Connect the LAN port adapter to the computer with an Ethernet cable.


Parameter configuration
Before configuring fax settings, please ensure that the adapter’s SIP account is successfully registered. Follow the steps below to verify.
1. Log in to the adapter’s management page using its default IP address 192.168.1.1; the default username and password are admin.
2. Go to Status> Basic > Line Status, ensure the line status is Registered.

SIP account registration
Go to FXS > Ligne 1, activate the Activation de ligne option, enter the Serveur proxy, Port proxy, Nom d’affichage, Numéro de téléphone, Compte and Mot de passe, then click on Enregistrer&Appliquer at the bottom of the page.

Fax configuration
Go to FXS > Line1 > FAX Configuration, the adapter supports three Fax modes including T.30, T.38, and ByPass. Keep the default configuration on this page.


Troubleshooting
When the fax machine cannot send/receive faxes normally, please follow the steps below to troubleshoot.
1. Ensure that the SIP account is successfully registered.
2. Change the audio codec to G.711U as shown below.
3. Tester avec trois modes fax.
4. Capture the associated packet trace and send it to the Flyingvoice technical support engineer.

|
|
