Overview
Log in to the web interface, go to “SIP Account-->Port Group” to configure the port group.
1. Enable port group: select the SIP server
2. Port Select: it has many modes, including All, Upstream, Upstream Cycle, Downstream, Downstream Cycle.
All: when there is a call, both FXS ringtones ring simultaneously, you can choose which one to answer
Ascending: when there is a call, the first line rings, pick up to call; at that moment, if another call arrives, the second line will ring, and the ring can be answered.
Cycle ascendant : lorsqu’il y a un appel, le premier port sonne, en cas de dépassement du temps de sonnerie sans réponse, passer au deuxième sonnerie, les autres fonctionnalités sont les mêmes
The following ring is the reverse of the one above
Descending: when there is a call, the second port rings, pick up to call; at that moment, if a call arrives, the first port will ring, answer after the ring.
Down‑stream cycle: when there is a call, the second port rings; if the ring time exceeds the unanswered threshold, switch to the first voice ring, other functions remain the same.
3. Group port number: numbers 1, 2, 3 … represent members joining this port. For example, if the group members are 1, 2 and 3, FXS1, FXS2 and FXS3 join the group port.
4. Platform account configuration: you must enter the platform SIP account information in the port group configuration, including the SIP account number, password, phone number, display name and registration server.
The FXS port can be configured this way. For example, if FXS1 port is 100 and FXS2 port is 200, you can use 100 to call 200 and 200 to call 100.
