الاتصال الفيزيائي

1. Connect the WAN port to the router/ss wizard to access the internet.

2. Connect the FXS converter FXS port or the telephone phone port to the fax machine fax device with a phone line.

3. Connect the LAN port adapter to the computer using an Ethernet cable.

تكوين المعلمات

Before setting up fax settings, please ensure the SIP account for the gateway is successfully registered. Follow the steps below to verify.

1. سجّل الدخول إلى صفحة إدارة المحول باستخدام عنوان IP الافتراضي 192.168.1.1، اسم المستخدم وكلمة المرور الافتراضية هي مسؤول.

2. Go to Status > Basic > Line Status, ensure the line status is Registered.

Register SIP Account

Go to FXS > Line 1, enable the option enable line, enter the Proxy server, proxy port, display name, phone number, account and password, then click Save and apply at the bottom of the page.

تكوين الفاكس

Go to FXS > Line1 > FAX configuration, the converter supports three fax modes including T.30, T.38 and ByPass. Keep the default settings on this page.

استكشاف الأخطاء وإصلاحها

عندما لا يتمكن جهاز الفاكس من الإرسال/الاستلام بشكل طبيعي، يرجى اتباع الخطوات أدناه لاستكشاف الأخطاء

1. تأكد من تسجيل حساب SIP بنجاح.

2. غيّر ترميز الصوت إلى G.711U كما في الشكل أدناه.

3. اختبار بثلاثة أوضاع للفاكس.

4. Capture the relevant packet trace and send it to Flyingvoice support engineer.


Go to الإدارة > تشخيص > التقاط الحزم, click start, perform the operation that the fax machine failed to send or receive fax. click stop, then click save.