Flyingvoice Hardware Support T.30/T.37/T.38
How does a fax machine work?
A fax machine works by scanning a document and converting it into binary data, then the fax transmits this data over a telephone line using a modem. The modem modulates the binary data into audible tones – a process similar to Internet dial‑up. These tones are then sent over the telephone line to the receiving fax. At the receiving end, another modem "demodulates" these tones back into binary data.
In the past, fax relied heavily on POTS, operating on analog signals that aligned perfectly with how fax machines encode and transmit image data as audible tones. It offered low latency and relatively noise‑free communication, crucial for fax transmission accuracy. Compared to early digital communication methods, POTS was more stable and less prone to disturbances, ensuring faxes arrived intact.

Challenges of Internet Fax
POTS is a century-old technology and POTS lines are disappearing today. FCC Order 19-72A1 marked the end-of-life for traditional analog POTS line systems. Telecom providers such as AT&T and Verizon have announced they will begin to discontinue service in certain areas, ultimately leading to higher costs and longer maintenance times. Today, FAX is still widely used in the medical sector and businesses; it is almost the only way to perform valid and legal file transfers remotely.
Each piece has two sides, a VoIP advantage is compression. You can combine data, voice and video, sliced into packets, on a SIP network in compressed form — to save bandwidth and, generally, maintain acceptable quality.
However, fax cannot be compressed because it distorts the fax machine’s signal, making it unreadable. G.711 encoding reserves high‑quality audio but requires more bandwidth. Faxing is generally time‑sensitive; the digital data in fax transmissions can be affected by packet loss, jitter, and latency. Absolutely, direct G.711 is not the best choice because it provides no redundancy with G.711. Even packet loss below 1 % can destroy an entire fax transmission.
The FAX T.38 is a real‑time protocol
In the classic ATA functions, Vola hardware supports two typical FAX communication protocols – T.30 and T.38. T.30 is the standard that defines how traditional fax machines communicate via the Public Switched Telephone Network (PSTN).
The T.38 was introduced to enable reliable fax communication over IP networks, addressing the challenges of transmitting traditional T.30 fax signals over VoIP or other packet-switched networks. T.38 transmits fax data in real time, converting the analog signals generated by T.30 into digital packets suitable for IP transmission and vice versa. However, it requires both ends to have T.38-compatible gateways or adapters.
Fax pass‑through tests have shown that even a packet loss below 1 % can result in unreliable fax transmissions, whereas T.38 with full redundancy has demonstrated it can tolerate packet losses above 10 %.
FAX T.37 : storage and transfer
Le T.37 est un protocole « store‑and‑forward », le FAX du fax machine est d'abord traité en image TIFF, puis transformé en paquets IP. Ainsi, l'intégrité du FAX est bien préservée. Avec le serveur d'application FAX, l'envoi et la réception sont aussi simples qu'avec l'ancien POTS. Vous n'avez plus besoin d'envoyer et de recevoir des FAX par e‑mail, vous conservez l'opération traditionnelle d'envoi et de réception de FAX, et les utilisateurs n'ont pas à changer leurs habitudes d'utilisation.
The FAX application server can process your faxes and deliver them via e‑mail, FAX platform or legacy fax machine correctly. The server also offers high security and reliability to cope with bad network conditions.
Flyingvoice hardware support T.30/T.37/T.38
Currently, all Flyingvoice POTS series products support T.37 and T.38. Simply connect your legacy fax to the FXS port of the Flyingvoice ATA gateway, and the path between the fax and the ATA gateway communicates via the T.30 protocol. Flyingvoice offers more flexible technology on the path from the ATA gateway to the remote endpoint (FAX platform or legacy fax).


Let’s discuss your project
Describe your requirements. Our team can help you select and plan your FlyingVoice solution.
