Overview

تقدم هذه المقالة بشكل أساسي كيفية تكوين وضع المكرر على FTA1101

وضع المكرر هو ميزة في البوابات تسمح لها بتمديد نطاق تغطية شبكة موجودة.

يمكن لـ FTA1101 أن يعمل كمحطة تتابع، تستقبل وتعيد إرسال الإشارات من الشبكة الرئيسية إلى المناطق ذات التغطية الضعيفة أو غير الموجودة.

مخطط طوبولوجي

خطوات التكوين

1. الاتصال الفيزيائي

Connect the LAN port on the FTA1101 to a computer using an Ethernet cable, and connect the Phone port to an analog phone. When connected correctly, the adapter light will glow solid red, and the computer will receive an IP address (192.168.1.X) from the adapter.

2. تسجيل الدخول إلى صفحة إدارة المحول

Open a browser and type the local IP address of the switch 192.168.1.1 in the address bar; the login page will appear as shown below, with both the default username and password being admin. Then click login.

Note: If you cannot open the page 192.168.1.1 in your browser, it is usually due to an IP address conflict with the WAN IP. In this case, open the page 192.168.2.1 instead.

3. Go to Wireless > Basic, change "Wireless Connection Mode" to Repeater, set the SSID of FTA1101, click "Save".

4. Go to Wireless > Repeater page, and connect to the router’s SSID.

اختر SSID، أدخل كلمة المرور، انقر OK

5. انتقل إلى Administration > Operating Mode، غير وضع التشغيل إلى “Advanced Mode”، اضغط “Save & Apply”.

6. Go to Network > LAN, enable local DHCP server and click “Save & Apply”

7. انتقل إلى صفحة Network > WAN، فعّل NAT وانقر “Save”

8. إعادة تشغيل FTA1101

اختبار الاتصال

Wireless customers, such as IP phones and mobile phones, can connect to the FTA1101 Wi‑Fi network to browse the internet.

قم بتوصيل هاتف تناظري بمنفذ FXS في FTA1101. بعد تسجيل الهاتف التناظري على خادم PBX، يمكن للهاتف التناظري إجراء المكالمات.

كيفية التسجيل على FTA1101: flyingvoice.com