(1) يجب أن يدعم كل من AP الرئيسي وAP المكرر WDS، يجب أن يستخدم جميعها راوترات FLYINGVOICE WiFi.
(2) In WDS mode, the VoIP/tr069/provision function cannot be used if the AP’s WAN port is not connected.
هيكل شبكة WDS。

طريقة التكوين:
(1) Set WDS mode; only one access point can be set as Lazy mode.
0: تعطيل - تعطيل جميع وظائف WDS.
1: Bridge mode – enable WDS function, the peer WDS access points are identified by the MAC address listed in the "WdsList" field below. In this mode, the AP will not send beacon signals or handle probe request packets, so the STA will not be able to connect.
2: Repeater mode – enable WDS function, the peer WDS access points are based on the MAC address listed in the "WdsList" field below.
Main AP, enable LAN DHCP server.
AP WDS, disable LAN DHCP server
3: Lazy mode - enable WDS function, and auto‑learn from the WDS packet containing the addr4 field.
(2) اضبط نفس وضع Phy/EncrypType/EncrypKey لزوجين من نقاط الوصول (AP)
(3) ضبط نقطتي الوصول (AP) على نفس القناة اللاسلكية، ولا يمكن استخدام القناة التلقائية أيضاً
(4)To support automatic roaming between two WDS repeater access points, both points must be set to the same SSID and security key.
(5) عطل خادم DHCP لنقطة الوصول التابعة وغير عنوان LAN الافتراضي لإحدى نقاط الوصول لتجنب تعارض IP.
(6) Set the “AP MAC Address” as the BSSID for the peer access point in Repeater/Bridge WDS mode.
