تمكن وظيفة النداء الصوتي المتعدد البث المُرسل من إرسال رسائل صوتية إلى عنوان متعدد بث محدد. جميع الهواتف التي تستمع إلى العنوان المحدد يمكنها استقبال الرسائل الصوتية من المُرسل. الوظيفة مشابهة للبث. يمكن لوظيفة النداء الصوتي المتعدد البث إرسال الإعلانات بسهولة إلى كل عضو في مجموعة البث المتعدد.

آلية التشغيل:

1. يمكن للهاتف تكوين عنوان المصدر المتعدد البث، المنفذ والرمز على صفحة الويب.

2. إعداد عنوان الاستماع المتعدد البث والمنفذ على صفحة الويب.

3. يبدأ الهاتف البث المتعدد، ويمكن لجميع الهواتف التي تستمع إلى العنوان استقبال محتوى البث المتعدد

ملاحظة: يجب أن تكون جميع الهواتف في نفس قطاع الشبكة. يمكن للهاتف إرسال/استقبال البث فقط على القناة نفسها، وسيتم تجاهل البث على القنوات الأخرى

استخدام وظيفة النداء الصوتي المتعدد البث دون PBX

تكوين المرسل المتعدد البث

سجّل الدخول إلى واجهة الويب للهاتف ، انتقل إلى هاتف > صفحة مفتاح الخط, اضبط نوع مفتاح الخط إلى النداء الصوتي، تنسيق القيمة هو IP متعدد البث العنوان:المنفذ.

After setup, the LCD displays the following, and multicast starts by pressing the Line key. The RTP multicast streams are one‑way and can only transmit from sender to receiver.

تكوين مستقبل البث المتعدد

Go to هاتف > IP متعدد البث صفحة الإعدادات، قم بتكوين عنوان IP المقابل وعنوان الاستماع الذي قمت بتعيينه على المرسل.

معامل
الوصف
التسمية
اسم البث المتعدد المستمع (اختياري)
عنوان الاستماع
Listening address: port (IP address range from 224.0.0.0 to 239.255.255.255, and port number range from 1024 to 65535).
نداء صوتي متداخل
يمكنك اختيار أولوية المكالمة العادية في ميزة النداء الصوتي المتدخل. إذا كانت أولوية تدفق RTP المتعدد البث الوارد أقل من أولوية المكالمة العادية الحالية، سيتجاهل الهاتف تدفق RTP المتعدد البث تلقائياً. يمكنك أيضاً تعطيل النداء الصوتي المتدخل، وسيتجاهل الهاتف جميع تدفقات RTP المتعدد البث من الشبكة المحلية تلقائياً.
تجاهل DND
If you don’t want to miss some emergency voice call alerts when Do‑Not‑Disturb (DND) is enabled, you can use the "Ignore DND" feature to set a lower priority for the voice call group. When DND is activated, calls with higher or equal priority will be answered automatically, while lower priority calls will be ignored.
أولوية النداء الصوتي نشطة
You can enable or disable active voice call priority, a feature that determines how the phone handles multiple RTP streams when a multi‑stream session is currently active. If active voice call priority is enabled, the phone automatically ignores low‑priority multi‑stream RTP streams, receives high‑priority or equal‑priority RTP streams, and places the current multi‑stream session on hold. If active voice call priority is disabled, the phone automatically ignores all received multi‑stream RTP streams.
Multicast encoding
Set the default codec when the phone sends multiple RTP streams.

استخدام النداء الصوتي المتعدد

When pressing the voice call button on the phone, an RTP stream is sent to the preconfigured multicast address, and other configured phones listening to the multicast address on the local network can receive the RTP stream and automatically answer the call.

During the call, the caller can press Wait to keep the current multi‑stream RTP session, the callee automatically disconnects the multi‑stream RTP session. The caller can press Resume to resume the held multi‑stream RTP session (re‑establish the multi‑stream RTP session). The caller can press EndCall to end the current multi‑stream RTP session.

Use the multi‑cast voice call feature with PBX

تكوين PBX

The phone can use multicast voice calling with the PBX together; we use Yeastar PBX as an example. In the PBX web interface, go to Call Features > Voice Call / Intercom Page, click Add.

نوع: نداء صوتي متعدد البث باتجاه واحد أو نداء صوتي متعدد البث باتجاهين.

Number: Number of voice calls

IP لقناة البث المتعدد: عنوان البث المتعدد ومنفذ البث المتعدد

تكوين الهاتف

Log in to the phone’s web interface, register the phone to Yeastar PBX, then go to Phone > Line Key

الصفحة، اضبط نوع مفتاح الخط إلى النداء الصوتي, عيّن القيمة إلى رقم النداء الصوتي.