[وصف المشكلة]

المستخدمون لا يعرفون كيفية مزامنة وقت النظام للهاتف أو يرغبون في تغيير الوقت والتاريخ يدويًا.

[تعليمات التصحيح]

1. The time and date are displayed on the idle screen of the IP phone. You can set the time and date manually or obtain the time automatically via the network through an NTP server.

2. يمكنك أيضًا تمكين الهاتف من الحصول على الوقت من خادم SIP.

تغيير إعدادات الوقت على واجهة الويب

Press OK or select Menu > Status to view the IP address. Then enter the phone’s IP address to log into the web page. The default username and password are admin/admin. As shown in the picture below:

Method 1: Synchronize time with an NTP server

Go to Administration > Management > Time/date Settings, enable NTP (enabled by default), select the correct time zone, change the primary NTP server (optional) and the secondary server (optional), set NTP sync (optional), then click Save & Apply at the bottom of the page to save the settings.

Note: If the NTP server has a public network address, the phone must be able to access the Internet, otherwise it will fail to sync time.

الطريقة 2 إعداد الوقت يدويًا

قم بتعيين الوقت/التاريخ يدويًا. كما هو موضح في الصورة أدناه:

Disable ‘NTP Enable’, enter time/date manually in ‘Current Time’, then click Save & Apply at the bottom of the page.

ملاحظة: باستخدام هذه الطريقة، سيعود الوقت إلى الإعداد الافتراضي عند إعادة تشغيل الهاتف.

Method 3: Synchronize time with a SIP server

The SIP server must support this function, and the phone’s time sync key must be enabled.

Go to SIP Account > Line1 > SIP Advanced Setup, enable Sync Clock Time, then click Save and Apply at the bottom of the page.

بعد ذلك، يمكنك التحقق مما إذا كان الوقت صحيحًا على الهاتف.

Change time settings on the phone's LCD screen

في شاشة الخمول، انتقل إلى القائمة > الأساسيات > الوقت والتاريخ. كما في الصورة أدناه:

Method 1: Synchronize time with an NTP server

اختر SNTP عام، ثم أدخل عنوان خادم NTP، اختر المنطقة الزمنية وتنسيق الوقت، ثم اضغط OK لإكمال الإعداد.

الطريقة 2 إعداد الوقت يدويًا

بعد إدخال الوقت والتاريخ، اختر عام واضغط < > لتحديد يدوي. ثم اضبط الوقت يدويًا، اضبط التاريخ، تنسيق الوقت وتنسيق التاريخ، ثم اضغط موافق لإكمال الإعداد.