سبب فشل ترقية البرنامج الثابت (Firmware)
When upgrading firmware, external factors such as "power outage" or "network interruption" can cause the upgrade to fail. If the firmware download is incomplete due to a "network interruption", you can restart the phone and upgrade again. If a power outage occurs during the upgrade, meaning that the firmware has finished downloading and the phone is in the "Firmware Upgrade" process, the phone will enter rescue mode after reboot; in this mode the phone cannot be used normally, but you can restore the phone via the rescue mode upgrade method (RESCUE MODE).
كيفية فحص معلمات وضع الإنقاذ؟
عند دخول الهاتف وضع الإنقاذ، ستظهر المعلمات التالية على شاشة الهاتف.

معرف VLAN: إذا كان هناك VLAN في بيئة الشبكة الحالية، سيحصل الهاتف على معرف VLAN المقابل للحصول على عنوان IP لقطاع الشبكة المناسب
Wan: عنوان IP للشبكة الداخلية الذي يحصل عليه الهاتف الحالي، يمكنك تسجيل الدخول إلى واجهة الويب للهاتف باستخدام هذا العنوان في بيئة الشبكة نفسها
Lan: when the phone enters rescue mode, it will enable DHCP, you can connect a computer to the phone’s Lan port, it will get an IP address in the 192.168.1.X range, then you can log into the phone’s web interface using the address 192.168.1.1:80.
كيفية استعادة الهاتف؟
Method 1. Log in using the WAN IP address and restore
تحقق من عنوان IP الخاص بـ WAN على شاشة LCD للهاتف، ثم اكتب هذا العنوان في شريط عنوان المتصفح، ستظهر نافذة تطلب كلمة المرور، أدخل 'admin'، ثم انقر تسجيل الدخول.

1. بعد تسجيل الدخول، يمكنك رؤية المعلومات الأساسية للهاتف في صفحة "الحالة".

2. Go to the "Upgrade" page to update the firmware again.

Method 2. Log in using LAN IP address and restore
1. صل الكمبيوتر بمنفذ LAN للهاتف باستخدام كابل إيثرنت، وسجّل الدخول إلى واجهة الويب للهاتف باستخدام عنوان LAN IP 192.168.1.1:80.

2. Go to the "Upgrade" page to update the firmware again.

