This article applies toFIP10, FIP10P, FIP11C, FIP11CP, FIP13G, FIP14G, FIP15G, FIP16
On a VoIP phone, the account (extension number) is comparable to a mobile phone’s SIM card. Registering an account facilitates receiving incoming calls or dialing outgoing calls. This article explains how to register an account on the FIP1X series phone.
Step 1. Network connection
The FIP1X series phones support both wired and wireless connections.

When using the wireless connection, please refer to the instructions below.
1) Go to Menu->Basic->Wi‑Fi.
2) Enable Wi‑Fi, select available Network(s).
3) Select a wireless network and connect, then press OK.
When using the wired connection, please refer to the instruction below.
Connect the router or switch to the phone’s Internet port
with an Ethernet cable.
Note : If the phone has not obtained an IP address, refer to the appendix to manually configure the IP address.
Step 2. Account registration
There are two ways to register the account on the phone.
Method 1: via the phone management page
Note: Before configuration, the PBX server administrator must provide the following registration information: domain name or server IP address (e.g., 192.168.20.110), port number (5060), account number (600), account password (password600).
1) Check the phone's IP address
Press the OK button
to verify the phone's IP address.
Note: for the FIP16, press the OK button, then go to Status to verify the IP address.

2) Log in to the phone management page.
Enter the phone’s IP address in the web browser address bar, then enter the username and password to log in (the default username and password are “admin”).

3) Enter the registration information.
Click SIP Account → Line1, enable the Line, enter the Proxy Server, Proxy Port, Display Name, Phone Number, Account and Password, then click Save & Apply.

Wait a moment, the phone will be successfully registered, you will see the registration status change to Registered, The LCD screen displays the extension number and a green phone icon, the line button lights up green.


Method 2. via the phone's LCD screen
Navigate to Menu -> Advanced (default password: admin) -> Accounts -> Line 1, enable registration, enter Display Name, Registration Name, User Name, Password, SIP server (domain name or server IP address) and SIP port, then press OK.


Appendix
Configure a static IP address on the phone's LCD screen
Access Menu->Advanced (the default password is admin)->Network->WAN Port->IPv4, change the mode to static IP, enter the IP address, subnet mask, gateway, primary DNS and secondary DNS, then press OK.

