This article applies toFIP10, FIP10P, FIP11C, FIP11CP, FIP13G, FIP14G, FIP15G, FIP16

In a VoIP phone, the account (extension number) is like a SIM card in a mobile phone. Registering an account makes it easy for phones to receive an incoming call or make an outgoing call. This article will explain how to register an account on the FIP1X series phone.

خطوة 1. الشبكة الاتصال

The FIP1X series phone supports wired and wireless connectivity.

عند استخدام اتصال لاسلكي، يرجى الرجوع إلى التعليمات أدناه.

1) انتقل إلى القائمة-> أساسي->Wi-Fi.

2) تشغيل Wi-Fi، تحديد الشبكة (الشبكات) المتاحة.

3) اختر شبكة لاسلكية واتصل بها، ثم اضغط OK.

عند استخدام اتصال سلكي، يرجى الرجوع إلى التعليمات أدناه.

قم بتوصيل الراوتر أو السويتش بمنفذ الإنترنت في الهاتف باستخدام كابل إيثرنت.

ملاحظة: إذا فشل الهاتف في الحصول على عنوان IP، راجع الملحق لتكوين عنوان IP يدويًا.

الخطوة 2. تسجيل الحساب

هناك طريقتان لتسجيل الحساب على الهاتف.

الطريقة 1. عبر صفحة إدارة الهاتف

Note: before configuration, the PBX server administrator must provide the following registration information: server domain name or IP address (e.g., 192.168.20.110), port number (5060), account number (600), account password (password600).

1) تحقق عنوان IP للهاتف

اضغط مفتاح OK للتحقق من عنوان IP للهاتف.

Note: For FIP16, press OK, then go to status to verify the IP address.

2) سجّل الدخول إلى صفحة إدارة الهاتف.

Enter the phone's IP address in the address bar of a web browser, then enter the username and password to log in (the default username and password are "admin").

3) أدخل معلومات التسجيل.

انقر على SIP Account->Line1،فعّل الخط، أدخل خادم الوكيل، منفذ الوكيل، اسم العرض، رقم الهاتف، الحساب وكلمة المرور، ثم انقر حفظ وتطبيق.

Wait a moment, the phone will register successfully, and you will see the Register status change to Registered, display the LCD screen with the extension number and a green phone icon, and the line button will light up green.

الطريقة 2. عبر شاشة LCD للهاتف

انتقل إلى القائمة ->Advanced (كلمة المرور الافتراضية admin) ->Accounts->Line 1, فعّل التسجيل، أدخل اسم العرض، اسم التسجيل، اسم المستخدم، كلمة المرور، خادم SIP (اسم نطاق الخادم أو عنوان IP)، ومنفذ SIP، ثم اضغط OK.

ملحق

Set a static IP address on the phone's LCD screen

Go to Menu->Advanced (default password is admin)->Network->WAN Port->IPv4, change to Static IP, enter IP address, subnet mask, gateway, primary DNS and secondary DNS, then press OK.