Flyingvoice VOIP router differs from traditional routers. It is a comprehensive wireless VOIP router that integrates an FXS interface, an SFP interface, a 4G‑LTE unit, and more based on the functions of a traditional NAT router. This article explains how to configure the router to access the Internet and register with a SIP server.
تنطبق هذه المقالة على FWR8102, FWR9601, FWR7102, FWR7302
الخطوة 1. الاتصال الفيزيائي
If you use an Ethernet cable for internet, connect the Ethernet cable to the router’s WAN port, and connect one of the router’s LAN ports to a computer.

|
|
|

إذا كنت تستخدم بطاقة SIM للحصول على الإنترنت، أدخل بطاقة SIM في الراوتر، وصل أحد منافذ LAN في الراوتر بجهاز كمبيوتر.
الخطوة 2. تسجيل الدخول إلى صفحة إدارة الراوتر
Open a browser and type the router’s LAN IP address 192.168.1.1 in the address bar, the login page will appear as shown below, both the default username and password are admin.

Step 3. Configure the WAN connection
Go to Status > Basic > WAN Ethernet Port Status to check the WAN IP address. When there is a WAN IP address, it means the router is working.


ملاحظة: إذا استخدمت بطاقة SIM للحصول على الإنترنت، تحقق من حالة LTE في هذه الصفحة، عندما يظهر عنوان IP تحت حالة LTE، فهذا يعني أن الراوتر يعمل.
الخطوة 4. Cتخصيص إعدادات الواي فاي
Go to Wireless 2.4GHz or Wireless 5GHz > Basic to change the router SSID (wireless network name).

Go to لاسلكي 2.4GHz or لاسلكي 5GHz > عبارة لاسلكية لتغيير كلمة مرور الواي فاي.

الخطوة 5. التسجيل إلى خادم PBX
Connect the analog phone to the router’s Phone 1 or Phone 2 port, go to FXS1 or FXS2 > SIP account, enable "Line Enable", enter the proxy server, proxy port, display name, phone number, account and password, then click Save&Apply at the bottom of the page.

Upon successful registration with the PBX server, the phone’s LED indicator on the router will light up, and the SIP account status registered. the analog phone can make outbound calls or receive inbound calls.
|

