In a VoIP phone, the account (extension number) is similar to a SIM card in a mobile phone. Registering an account makes it easy for phones to receive an incoming call or request an outgoing call. This article explains how to register an account on the IP622CW.
خطوة 1. الشبكة الاتصال
يدعم IP622CW الاتصالات السلكية واللاسلكية.

عند استخدام الاتصال اللاسلكي، يرجى الرجوع إلى التعليمات أدناه.
1) اضغط زر الإعدادات
, go to Wireless-> Wireless Connection.
2) اختر شبكة لاسلكية واتصل بها.
عند استخدام الاتصال السلكي، يرجى الرجوع إلى التعليمات أدناه.
قم بتوصيل الراوتر أو السويتش بمنفذ الإنترنت في الهاتف
باستخدام كابل إيثرنت.
ملاحظة: إذا فشل الهاتف في الحصول على عنوان IP، راجع الملحق لتكوين عنوان IP يدويًا.
الخطوة 2. تسجيل الحساب
هناك طريقتان لتسجيل الحساب على الهاتف.
الطريقة 1. عبر صفحة إدارة الهاتف
Note: before configuration, the PBX server administrator must provide the following registration information: server domain name or IP address (e.g., 192.168.20.110), port number (5060), account number (600), account password (password600).
1) تحقق من الهاتف’عنوان IP الخاص بـ s
اضغط مفتاح الانتظار
للتحقق من عنوان IP للهاتف.

2) سجّل الدخول إلى صفحة إدارة الهاتف.
Enter the phone's IP address in the address bar of a web browser, then enter the username and password to log in (the default username and password are "admin").
3) أدخل معلومات التسجيل.
انقر على SIP Account->Line1،فعّل الخط، أدخل خادم الوكيل، منفذ الوكيل، اسم العرض، رقم الهاتف، الحساب وكلمة المرور، ثم انقر حفظ وتطبيق.

Hold on a moment, the phone will register successfully, and you will see the Register status change to Registered, the phone screen will display the extension number, and the line key will light green.
Method 2.Via LCD screen on the phone
اضغط زر الإعدادات
, go to Accounts (default password is admin) -> Line 1, Activate the line, enter password, account, display name, phone number, SIP Proxy server (server domain name or IP address), and SIP Proxy port, then click save.




ملحق
CSet a static IP address on thephone’sLCD screen
اضغط زر الإعدادات
, go to Network -> Connection type, change mode to Static IP, enter IP address, subnet mask, gateway, primary DNS and secondary DNS, then press OK.
