Overview
The FTA5111 is a VOIP adapter with an FXS port and an FXO port, which allows you to connect an analog phone and the PSTN line. Before configuring the adapter, you must obtain SIP registration information from the PBX server.
Step 1. Physical connection
1. Connecter les FTA5111 WAN port vers le Routeur/Commutateur pour accéder à Internet, connectez‑en un LAN port vers un ordinateur avec un câble Ethernet, connectez le port FXS au téléphone analogique, connectez le port FXO à la ligne PSTN.

2. When a correct connection is made, the Power and LAN LEDs of the adapter will be green, the WAN LED is blue, the computer will receive an IP address (192.168.1.X) from the adapter. When you pick up the analog phone, you will hear the IVR.
Step 2. Log in to adaptermanagement page of

Open a browser and enter the LAN IP address of the adapter 192.168.1.1 in the address bar, a login page appears as shown below, the default username and password are admin. Then click Connect.
Step 3. Configure the FXO Port
1. Go to FXO> SIP, enable the option Port Enable, enter Proxy server, Proxy port, Display name, Phone number, Account et Password, then click Save & Apply at the bottom of the page.


2. Go to FXO>Call Route, configure the call routing rule as follows.


Step 4. Configure the FXS port
Go to FXS > Line 1, enable the option Line Enable, enter the Proxy server, Proxy port, Display name, Phone number, Account and Password, then click Save & Apply at the bottom of the page.

Upon successful registration to the PBX server, the adapter's FXS LED will be solid green, and the SIP FXS account status indicates Registered. The analog phone can make outbound calls or receive inbound calls.
