Overview
FTA5111 is a VOIP adapter with one FXS port and one FXO port, allowing you to connect to an analog phone and PSTN line. Before configuring the adapter, you need to obtain SIP registration information from the PBX server.
الخطوة 1. الاتصال الفيزيائي
1. Connect the FTA5111’s WAN port to the router/switch to access the Internet, connect one LAN port to a computer using an Ethernet cable, connect the FXS port to the analog phone, and connect the FXO port to the PSTN line.

2. When connected correctly, the power light and LAN light on the switch will turn green, the WAN light will turn blue, and the computer will receive an IP address (192.168.1.X) from the switch. When lifting the analog phone handset, you will be able to hear the IVR.
الخطوة 2. تسجيل الدخول إلى محولصفحة الإدارة

Open a browser and type the LAN IP address of the gateway 192.168.1.1 in the address bar, a login page appears as shown below, both the default username and password are admin. Then click Login.
Step 3. Configure the FXO port
1. Go to FXO> SIP, enable the option Port Enable, enter the Proxy Server, Proxy Port, Display Name, Phone Number, Account and Password, then click on Save & Apply at the bottom of the page.


2. Go to FXO>Call Path, set up the call routing rule as follows.


Step 4. Configure the FXS port
Go to FXS > Line 1, enable the option Line Enable, enter the Proxy Server, Proxy Port, Display Name, Phone Number, Account and Password, then click Save and Apply at the bottom of the page.

Upon successful registration with the PBX server, the FXS converter light will turn solid green, and the FXS SIP account status will show registered. The analog phone can make outbound calls or receive inbound calls.
