هذه المقالة تقدم حالتين أساسيتين لتكوين المحول للوصول إلى الإنترنت وتسجيله على خادم SIP. الحالة 1 للموقف الذي يستخدم اتصال سلكي للحصول على الإنترنت، الحالة 2 للموقف الذي يستخدم اتصال لاسلكي للحصول على الإنترنت.
State 1 Use an Ethernet cable for internet access
الخطوة 1. الاتصال الفيزيائي
|
|

الخطوة 2. تسجيل الدخول إلى محولصفحة الإدارة
افتح متصفحًا واكتب عنوان IP LAN للبوابة 192.168.1.1 في شريط العنوان، تظهر صفحة تسجيل الدخول كما هو موضح أدناه، كلا من اسم المستخدم الافتراضي وكلمة المرور هما مسؤول. ثم انقر تسجيل الدخول.
خطوة 3. تحقق من حالة الشبكة
The adapter will automatically obtain a WAN IP address, meaning the internet works without any settings. Check the network status under Status > Basic > Network Status.

Step 4. Register to PBX server
Connect the analog phone phone to the adapter phone port, go to SIP account> Line 1, enable the option Enable line, enter the Proxy server, Proxy port, Display name, Phone number, Account and Password, then click Save and apply at the bottom of the page.

|
|
Upon successful registration with the PBX server, the switch LED will change to solid green, and the SIP account status will show as registered. The analog phone can make outbound calls or receive inbound calls.
.
After confirming the call is working, you can disconnect the cable from the computer to the FTA1101's LAN port.
الحالة 2 استخدام الاتصال اللاسلكي للحصول على الإنترنت
الخطوة 1. الاتصال الفيزيائي
Connect the FTA1101’s LAN port to a computer using an Ethernet cable, connect the Phone port to the analog phone. When properly connected, the adapter light will flash red, and the computer will receive an IP address (192.168.1.X) from the adapter.
الخطوة 2. تسجيل الدخول إلى محولصفحة الإدارة
Open a browser and type the LAN converter’s IP address 192.168.1.1 in the address bar; the login page will appear as shown below, with the default username and password both being admin. Then click login.
Note: If you cannot open the page 192.168.1.1 in your browser, it is usually due to an IP address conflict with the WAN IP. In that case, open 192.168.2.1 instead.

الخطوة 3. تكوين الـ محول’s وضع الاتصال اللاسلكي
To ensure the converter has an internet connection, we need to change the converter’s wireless connection mode to repeater. Go to Wireless > Basic, enable the radio, change wireless connection mode to repeater, set SSID (wireless network name). Click Save at the bottom of the page.

|
|
Go to لاسلكي > مكرر، حالة الاتصال اللاسلكي هي غير متصل. اختر الشبكة اللاسلكية التي تريد الاتصال بها، انقر على اتصل, أدخل الـ كلمة المرور وانقر OK
.
عند اتصال المحول بشبكة WiFi بنجاح، سيتغير حالة الاتصال اللاسلكي إلى متصل. وعرض SSID المتصل به.

Step 4. Log in to PBX server
Connect the analog phone phone to the adapter phone port, go to SIP account> Line 1, enable the option Enable line, enter the Proxy server, Proxy port, Display name, Phone number, Account and Password, then click Save and apply at the bottom of the page.

Upon successful registration with the PBX server, the switch LED will change to solid green, and the SIP account status will show registered. The analog phone can make outbound calls or receive inbound calls.

After confirming that the call is working, you can disconnect the cable from the computer to the FTA1101's LAN port.
