Overview
The action URL is a phone‑side action (such as answer, hang up, incoming calls, outgoing calls, etc.) that generates a URL. The URL can be user‑defined. When an action is generated, the phone sends an HTTP GET to the user‑defined URL to report the action.
1. Call message download method
Log in to the web GUI, go to "Phone -> Action URL" to configure. On this page, select the action to report by the phone, enter a custom URL, and fill in Action URL allow IP List (the server http IP), as illustrated below:
definition of URL: 192.168.10.236 definition of the parameter:
As illustrated in the image, 192.168.10.236, 192.168.10.236 is the HTTP server address, established means the phone is establishing a call, ip=$ip indicates the phone's IP address. In the end, the entire line indicates that the phone (192.168.10.236) is establishing a call.
Here is the package:
2. The user enters the corresponding HTTP command in the appropriate address bar. The phone can execute the corresponding operation after receiving the corresponding URI command, and returns a 200 OK response to the requester.
Enter phone ip/cgi-bin/ConfigManApp.com?Key=xxx in the address bar of the web page, where Phone ip is replaced by the phone’s IP address and key=xxx by the corresponding function key. For example, if the phone’s IP address is 10.1.4.22, enter 10.1.4.22 in the address field of the web page, and the phone will execute the OK key press action to access the Status menu. As illustrated below:
