Overview
Action URL is a phone-side action (such as raising the speaker, ending the call, incoming calls, outgoing calls, etc.) to generate a URL. The user can specify the URL. When the action is generated, the phone sends an HTTP GET request to the user‑defined URL to report the action.
1. طريقة تحميل رسالة الاتصال
Log in to the web GUI, go to "Phone -> Action URL" for setup. On this page, select the action the phone needs to report, enter a custom URL, and enter the whitelist of IP addresses (server HTTP IP), as shown in the figure below:
تعريف URL:192.168.10.236 تعريف المعامل:
As shown in the picture, 192.168.10.236, 192.168.10.236 is the HTTP server address, established means the phone has initiated a call, ip=$ip means the phone's IP address. In the end, the entire line indicates that the phone (192.168.10.236) has initiated a call.
هذه هي الحزمة :
2. The user enters the corresponding HTTP command in the appropriate address bar. The phone can perform the corresponding operation after receiving the corresponding URI command, and send a 200 OK response to the sender.
Enter phone ip/cgi-bin/ConfigManApp.com?Key=xxx in the web page address bar, where Phone ip is replaced with the IP address of the IP phone and key=xxx is replaced with the corresponding functional key. For example, if the phone’s IP address is 10.1.4.22, enter 10.1.4.22 in the web page address input field, and the phone will execute the OK key press action to enter the Status menu as shown below:
