By Steve F., March 23, 2026

1 How do alarm panels work ?

An alarm panel is the central component of an alarm system. On one hand, it connects to various sensors (such as fire or intrusion detectors) via a two‑wire bus. On the other hand, it connects to the PSTN network via a telephone interface, enabling communication with a receiver.

The receiver is usually deployed in a remote monitoring center (monitoring company). Its main functions include:

  • Reception of alarm signals from alarm panels
  • Execution of supervisory tasks such as periodic checks ("polling")

A receiver can manage connections from multiple alarm panels and typically provides IT interfaces to transmit alarm data to systems such as fire monitoring systems (FMS). A typical example is Bosch's Conettix series.


2 Which protocols are used between alarm panels and receivers?

Over several decades of development, more than a dozen communication protocols have emerged between alarm panels and receivers. These protocols were first introduced by different manufacturers and then widely adopted in the industry.

All of these protocols are designed to operate on the PSTN network. Technically, they can be classified into three main types:

1. Protocoles à base d’impulsions

Ces protocoles transmettent l’information en utilisant des rafales de tonalité (signalisation à impulsion).

Example: “3+1 Standard 1900 Hz carrier, 1400 Hz ACK.”

2. DTMF-based protocols

They use Dual‑Tone Multi‑Frequency (DTMF) signaling.

The most widely used protocol today is Contact ID, which falls under this category.

3. FSK-based Protocols

These items rely on Bell 103 Frequency Shift Keying (FSK).

Examples include BFSK and Modem II.


3 key challenges of POTS Replacement in alarm applications

As described above, all alarm communication protocols were originally designed for transmission over PSTN networks. Decades of real‑world deployment have proven that they can operate reliably in this environment, supporting millions of alarm panel connections.

However, these protocols intrinsically depend on the key characteristics of PSTN networks:

  • Low latency
  • Synchronized transmission (without jitter)

This dependency becomes a major challenge when migrating to IP-based networks.

Example: Protocol detection based on handshake

In many systems, receivers automatically detect the protocol used by the alarm panel through handshake tones.

For example:

Contact identity exchange :

o 100 ms at 1400 Hz, 100 ms silence, 100 ms at 2300 Hz

  • Pulse protocols :

Typically a continuous tone of 1400 Hz or 2300 Hz lasting longer than 500 ms.

After the call is established, the receiver sends various handshake tones and determines the protocol based on the panel's response.

However, this process requires precise time control. While PSTN networks naturally support this precision, VoIP networks face:

  • Jitter
  • Packet Loss
  • Variable Latency

These factors disturb timing‑sensitive signaling, leading to communication failures. This is one of the main reasons why alarm panels often fail when connected via standard VoIP solutions.

Alarm protocols are also highly latency‑sensitive. Traditional VoIP approaches—such as increasing jitter buffer size to compensate for instability—do not work well in this scenario, as they introduce additional delay that further disrupts protocol timing.


4 Flyingvoice solution for alarm panel connectivity

4.1 General solution: V.152 + SBC

The International Telecommunication Union (ITU) defined the V.152 standard to enable Voice Band Data (VBD) transmission over VoIP networks.

However, due to :

  • Limited request (VBD represents a small portion of traffic)
  • Implementation complexity

Most UC platforms have chosen not to support V.152.

Flyingvoice’s replacement POTS CPE devices – including the PR08‑Pro, LM150, PR12 and PR18 – fully support V.152. Paired with the Flyingvoice POTS Media SBC, they enable seamless conversion between V.152 and standard G.711, ensuring interoperability with major UC platforms such as:

  • Netsapiens
  • MetaSwitch
  • Alliance
  • FreeSWITCH

Based on theoretical analyses and laboratory tests, under laboratory network conditions with total latency (fixed + jitter) < 300 ms and packet loss < 3 %, our solution can achieve a communication success rate of 99.99 %. This makes it a practical and scalable solution for MSP deployments.

4.2 Improved function: Replacement of the contact ID

Beyond standard protocol support, Flyingvoice’s solution offers advanced overload capabilities, including:

  • Replacement of the dialed number
  • Account number Contact ID that overrides

This is especially useful in modernization scenarios. MSPs can:

  • Redirect calls to a new monitoring center
  • Change account credentials without changing the alarm panel configuration

En conséquence, le déploiement devient nettement plus rapide et plus flexible.

4.3 Switch to IP-based communication: IP Communicator

With the evolution of surveillance infrastructure, many monitoring centers are moving to IP-based receivers.

Flyingvoice CPE devices support IP Communicator mode, allowing direct IP reporting to alarm monitoring platforms.

During operation in IP Communicator mode:

  • PSTN-based protocols are limited to:

Alarm panel ↔ CPE flyingvoice

  • They are not transmitted over VoIP networks, eliminating :

Jitter issues

oImpact of packet loss

Latency sensitivity

  • The CPE converts signals into IP‑based reports for transmission to the monitoring center

This approach completely avoids the instability associated with VoIP.


5 Summary: Which solution suits your service?

For most UC service providers:

The V.152 + SBC solution is the most practical choice

  • Fast integration (in a few days)
  • No need to modify existing systems
  • Reliable POTS replacement capacity

However, in challenging network environments — such as:

  • Jitter > 500 ms
  • Packet loss > 5 %
  • Frequent connectivity interruptions

La solution IP Communicator est l'option préférable, elle élimine la dépendance à la qualité de transmission VoIP et garantit une fiabilité maximale pour les communications d'alarme critiques.