Replacing elevator phones is the most common application among many POTS Replacement projects. In the United States, for example, there are more than one million elevators, many of which require a POTS line replacement.

However, replacing elevator telephone lines is not always as simple as it seems.

In our experience, some elevator brands are equipped with a "Line Share Switch." This can be confusing for those who are not familiar with the elevator model because, in the system, you will see two telephone lines. If these lines are connected incorrectly, calls from the elevator panel will often fail to reach your PBX (UC Cloud), and you will see the device repeatedly dialing on site

You might wonder: is there a problem with the device's CPC (Caller‑Party Control)?

Caller control: it is an 'off' signal sent by the ATA to instruct the elevator phone to hang up.

Ce comportement de numérotation inhabituel est en fait causé par la connexion de l'ATA à la mauvaise ligne.

How does REM (Remote Elevator Monitoring) work?

Here is a common REM system structure.

  • Line 1: a telephone line connected to the REM unit, which manages data communication with the elevator and receives messages from it.
  • Block 1: surge protection unit, which is also connected to an external telephone line.
  • Block 3: "Line share switch" case

When a passenger presses the emergency 'Help' button inside the cabin, the REM system takes control of the telephone line and performs two separate actions:

Data transmission: First, it establishes a high‑speed data connection via an integrated modem to transmit error codes, elevator location tags, and first‑cause data to the REM system (line 1 of the diagram).

voice link: Once the data has been successfully transmitted (or in the absence of a response), the system cuts the data connection and switches to voice mode. It then connects the stranded passenger directly to the emergency assistance station/security department via the telephone line (line 2 in the figure).

Si vous souhaitez que l’ATA que vous installez remplace la ligne d’urgence, de sorte que lorsqu’on appuie sur le bouton d’alarme de l’ascenseur il compose un « opérateur en direct » pour parler directement avec le passager bloqué, vous devez connecter le port FXS de l’ATA à la ligne 1 du « Line Share Switch », plutôt qu’à la ligne téléphonique reliée à l’unité REM.

If the ATA is connected to the telephone line corresponding to the REM system instead, the elevator will continuously retry because it cannot connect to the REM unit. From the ATA’s perspective, this appears as repeated “hook‑off” events, leading to continuous detection of on‑hook and off‑hook events even when the CPC is active.

Dive into the REM system

The REM system supports multiple communication protocols.

The P100 is a widely used communication protocol in elevator monitoring and control systems that uses DTMF signaling. Flyingvoice's ATA supports several DTMF transmission methods, including RFC2833, RFC4733, In‑band and SIP Info. Whatever the SIP platform format, we can ensure full compatibility.

Additionally, Flyingvoice’s ATA is specifically optimized for inbound DTMF transmission. If you use DTMF for elevator programming, you can do so with confidence, knowing that transmission errors will not cause programming failures.

If your REM system transmits a specific type of modem signal (FSK), the Flyingvoice ATA can also facilitate it. Flyingvoice devices support V.150 modem transmission and, with the help of a POTS media SBC, can ensure successful modem signal transmission over 4G networks or in adverse network conditions.

How Flyingvoice can help with elevator phone applications

1. The entire Flyingvoice product range is optimized for elevator intercom applications, offering configurable CPCs compatible with various elevator intercom models; supporting a standard 48 V power supply; supporting enhanced DTMF for programming.

2. Designed for uninterrupted operation, Flyingvoice hardware supports 24‑hour standby with battery and Internet failover, full compliance with ASME A17.1/CSA B44 safety code for elevators.

3. Cloud‑based management, Flyingvoice offers a range of features for remote configuration, monitoring, and diagnostics, which not only improves efficiency during installation but also provides a significant long‑term operational advantage.