Overview
1.Wireless repeater overview
Wireless repeater mode, i.e., a wireless access point acting as a repeater in the network. To achieve repeater and signal amplification, extending the wireless coverage.
2. Wireless repeater network
The wireless repeater network mode is relatively simple, generally consisting of a main access point and several repeater access points, as follows:
The repeater access point connects to the main access point in repeater mode, extending wireless range up to 20 meters. Thus, the remote client can receive a stronger wireless signal.
3. Basic device configuration
Configure as follows:
2) Select the appropriate wireless SSID connection
Remarques : mode répéteur, définissez le mode pont, l'adresse MAC source du client peut être partiellement remplacée.
3. Wireless repeater comparison with WDS
Wireless repeater and WDS contrast: wireless repeater mode, i.e., a wireless access point in the network acting as a repeater. To achieve signal repeater and amplification. WDS allows wireless access points to connect (repeat) wirelessly, which does not affect the functionality of their AP coverage, i.e., WDS supports APs in relay application mode
4.Recommended product--FWR8102
Highlights
• 4 ports RJ45 100 M, 2 ports FXS RJ11
• 2.4 GHz 300 Mbps Wi‑Fi
• Richness of QoS capabilities on wired and wireless
• Real‑time fax over IP via T.38 and T.30 with G.711
• PESQ is above 4.3 in G.711, PESQ is above 3.7 in G.729
• Automatic provisioning TFTP/HTTP/HTTPS, TR069, SNMP
1) Set the wireless mode to repeater
Highlights
• 4 ports RJ45 100 M, 2 ports FXS RJ11
• 2.4 GHz 300 Mbps Wi‑Fi
• Richness of QoS capabilities on wired and wireless
• Real‑time fax over IP via T.38 and T.30 with G.711
• PESQ is above 4.3 in G.711, PESQ is above 3.7 in G.729
• Automatic provisioning TFTP/HTTP/HTTPS, TR069, SNMP
