Overview

My colleague Xiaozhang asked me yesterday: "If I call someone on their mobile and they don't answer, I can send them an SMS reminder. But if I try to reach them on the landline and they don't answer, how do I let them know I called?" What a silly question! Why not leave a message? "But I don't know how," replied Xiaozhang. It's very simple. Let me show you. Voicemail configuration 1. Open the APX9102 web configuration interface via an IP address; then enter the username and password to log in, as shown in Figure 1 (the field marked in red is mandatory).
20151026051912125.png
Figure 1
2. Click IPPBX then click here to configure the PBX to access the PBX configuration interface, as illustrated in Figure 2.
20151026051951393.png
Figure 2
3. Enter the username and password (as shown in Figure 3) to access the configuration interface, as illustrated in Figure 4.
20151026052016212.png
Figure 3
20151026052153367.png
Figure 4
4. Click User, then find the extension number (e.g., 600) for which you want to configure voicemail, and click Edit to access the corresponding configuration interface, as illustrated in Figure 5.
20151026052437228.png

Figure 5

5. Check Enable voicemail for this user and set a password (e.g., 1234) to use the voicemail box, as illustrated in Figure 6
20151026052525451.png
Figure 6
6. Click Update to save the configuration. Make sure to click Apply changes in the upper right corner, as shown in Figure 7.
20151026052604197.png
Figure 7
7. Click Voice Mail in the configuration interface. In the interface that appears, click General Settings and verify the number (e.g., *97) set in Extension for message verification, as shown in Figure 8. This number is the function code used to listen to voice messages. Dial the number on the extension phone, and you can listen to voice messages.
20151026052651717.png
Figure 8
Voicemail settings:
1) Extension to check messages: set an extension number to check voicemail. The user can dial this number to access the voicemail box.
2) Numérotation directe de la messagerie vocale : cochez cette option, et l’utilisateur peut composer #+numéro d’extension pour laisser directement un message.
3) Max greeting: set the duration of a greeting message.
4) Dial “0” for the operator: check this option, and the user can exit voicemail directly by pressing 0 and connect to an operator. Configure the operator in the Options panel.
5) Maximum number of messages per folder: indicates the maximum number of messages in a folder. Additional messages cannot be recorded and are invalid. Users are advised to regularly clean read messages.
6) Maximum message duration: indicates the maximum duration of a voice message. When the time expires, the system stops recording the message and prompts the user for the next operation according to the dialing plan.
7) Minimum message duration: indicates the minimum duration of a voice message. If the user stops recording the message before this time, the message will not be transmitted to the target extension station.
8) Announce the Call-ID message: check this option, and the system plays the caller's ID before playing the message.
9) Announce the message duration: check this option, and the system reads the message duration before playing it.
10) Envelope reading: check this option, and the system reads the message generation time before reading the message.
11) Allow users to review: check this option, and Apx9122 asks the user if they want to record another message or save the current message after the user has left a message and pressed #.
Extension phone configuration (for the IP542N phone)
1. Access the web configuration interface via an IP address, then enter the username and password to log in. Click SIP Account and select a line (e.g., line 1) to enable voicemail, as shown in Figure 9. Ensure that this line has been registered with the PBX, that the Enable voicemail for this user option is checked, and that a mailbox access password has been set.
20151026052812208.png
Figure 9
2. Click Additional Services and set MWI Enable to Enable and the voicemail number to *97, as shown in Figure 10.
20151026052952526.png
Figure 10
3. Click Save. It is preferable to restart the system after configuration.
Voice gateway configuration (for G801)
Record the extension phone connected to the G801 with the PBX and restart the system after recording. Make sure to check "Enable voicemail for this user" to activate voicemail for this phone and set a password to access the voicemail box, as illustrated in figures 11 and 12.
20151026053045938.png
Figure 11
20151026053108276.png
Figure 12
Submit and verify messages
After the previous configuration, the user can exit and check a message.
1. Leave a message
If the user does not answer a call or the line is busy, the system will ask the caller if they wish to leave a message: “The number you dialed is not answered. You can leave a message after the beep.” Speak into the microphone, hang up the phone or press #.
2. Verify a message
For an IP542N phone, if the user receives a message, the indicator in the upper right corner of the phone remains lit.
20151026053159186.png
In this case, you have verified the message by one of the following methods:
Method 1: press the button 20151026053235101.png, select a line, then click Select. Follow the prompt to verify the message.
Method 2: If the message is received via a gateway, the analog phone connected to the gateway will ring twice. Press *97, follow the prompt to enter the password, then press 1 to check the message.
That’s all for voicemail. Go ahead, try it now.