Overview

2 Advanced BLF functions of the IP phone and the multifunction key BLF is an abbreviation for Busy Lamp Field. This function is primarily designed for the reception secretary, who can check the status of each station via the LED status when the LEDs are correctly configured. The explanation of the LED status is as follows:

LED indicator

Explanation

Solid green

The extension is inactive.

Blinking red

The extension rings.

Solid Red

The line is busy, usually on a call.

Table 4 BLF Indicator
Supposons la situation suivante : lorsque le secrétaire de la réception reçoit un appel entrant et doit le transférer vers une extension, il/elle peut vérifier si l'extension est occupée en consultant le statut LED ; ou après avoir transféré l'appel, il/elle peut confirmer si l'extension sonne sans que personne ne décroche, et dans ce cas, il/elle peut reprendre l'appel et informer l'appelant que la personne recherchée n'est pas à son poste, en proposant de le rappeler plus tard. Tout cela se fait via la fonction BLF. Pour les téléphones IP, les touches utilisées pour réaliser la fonction BLF sont généralement appelées touches multifonctions. La touche est habituellement un bouton avec LED ; d’une part, c’est un bouton, d’autre part, c’est un indicateur LED qui indique l’état de la touche avec les deux couleurs rouge et vert. Lorsque la touche multifonction est utilisée comme BLF, chaque touche correspond typiquement à un numéro d’extension. Bien que la taille du téléphone soit généralement petite, 20 touches multifonctions sont déjà nombreuses, cependant, le nombre d’extensions dans la plupart des bureaux dépasse 20, que faire dans ce cas ? Simplement, la réponse consiste à utiliser des modules d’extension, les téléphones IP d’entreprise peuvent prendre en charge des modules d’extension, par exemple, l’IP652 peut prendre en charge six modules d’extension et un maximum de 260 touches multifonctions, (dans l’image suivante3, l’IP652 est connecté à 1 module d’extension, et prend en charge 60 touches multifonctions), cela suffit déjà pour les applications de bureau générales.
20130425103212983.png
Image 3: IP652 with an extension module
The multifunction key supports not only BLF, but also a series of value‑added functions such as shortcut keys, speed‑dial keys, etc. Intelligent configuration of multifunction keys generally makes SIP phones more convenient and efficient. 3 network functions, VPN and QoS The IP phone is a type of network device that connects to the Internet via the local network. For the IP phone to operate stably, QoS configuration is crucial. In short, the user must be able to give higher priority to SIP signaling packets and RTP packets, so that routers and other network equipment prioritize voice‑call related data, ensuring the phone’s connection and voice quality. The IP phone must configure level 2 QoS (IEEE 802.1p) and level 3 QoS (IP packet TOS field). Additionally, it is usually necessary to configure SIP signaling and RTP packets separately, as shown in the following image 4.

20130705045356206.jpg
Image 4 QoS

The user must trace packets to confirm whether QoS is correctly applied. You need packet tracing tools, such as Wireshark (open‑source tool, see www.wireshark.org), intercept packets from the IP phone and analyze whether the corresponding field is consistent with the configuration phase. 4 Dial Plan - Very Important Dial plan, often called a numbering rule or digit map, means controlling the user's dialing behavior via certain configurations, such as auto‑dial (without pressing the "send" or "#" key0, abbreviated auto‑dial, auto‑bit addition, auto‑replacement, delay, play dialing tone for outbound calls, etc.). Each company has different methods to implement a specific dial plan; the user can verify whether the phone's dial plan capacity is sufficient by testing the functions described in the following chat.
NO.

Dial plan configuration

User input

Destination address
(Obtained from SIP packets)

Desired on-site numbering tone

1

001,<:8021>,[0-2]

0012

00180212

Play the outgoing dialing tone after the user presses 1 and stop after the user presses 2.

2

2,3.<958:65>,3

23339583

2333653

Play the outgoing dialing tone after the user presses 1 and stop after the user presses 3.

3

7,5,<65:>,80

756580

7580

Play the outgoing dialing tone after the user presses 7 and continue playing after the user presses 5, then stop after the user presses 6.

4

<[345-6]:>0x,755

306755

06755

Play the outgoing dialing tone after the user presses 6 and stop after the user presses 7.

5

<8,6,2,1:>9542x

862195425

95425

Play the outgoing call dial tone after the user presses 8 and continue playing it after keys 6 and 2, but stop it after key 1.

6

<[12-3],4:54>513

14513

54513

Play the outgoing dialing tone after the user presses 1 and stop after the user presses 4.

7

268,<953:21>

268953

26821

Play the outgoing numbering tone after the user presses 8 and stop after the user presses 9.

Table 5 Numbering Plan Test
Note: each company has different methods for testing the numbering plan; they are not all identical to table 5. 5 Address book and blacklist The directory and blacklist are other test features for the IP phone. ‘Blacklist’, as its name implies, is used to block certain unwanted numbers (usually mass advertising calls or malicious calls). The IP phone will automatically reject calls from these numbers. Like blacklists or MSN or QQ, numbers recorded in the directory and the blacklist are exclusive; a directory number cannot exist simultaneously in the blacklist. These two configurations are easy to delete, as shown in image 5, the settings are simple enough.

Image 5 Address book and blacklist

6 Call History Generally, the user can search the call history on the phone’s LCD screen, and sometimes verify it on the phone’s web interface.
Evaluation of this feature: it must not only be easy to use the interface, but also contain sufficient log entries. Generally, the list of incoming and outgoing calls should contain at least 60 entries and missed calls 40 entries.
7 Remote MaintMaintenance and support features
This includes the system log (syslog), downloading and uploading configuration files, provisioning, SNMP, TR069, etc. More details will be described in “4. Deployment and mass management”.
8 Security and certificate Management
If an IP phone claims to support TLS/SRTP security functions, or support TR069 or HTTPS provisioning, it should generally also support certificate management, including the CA certificate and the certificate’s private key. The certificate management interface is typically presented as in image 6.

20130705045424342.jpg
Image 6 Certificate Management