Overview

Use gateway products by following these steps to implement IVR:
(1) FXS port connected to the analog phone.
(2) Hang up and press the "****" key to start the IVR. The user then hears the prompt "1. Network port configuration …".
(3) Depending on the options, pressing any digit between 1 and 7 will broadcast the corresponding content. For digits 1 to 7, please refer to the table below for details.
5.png

Review:
◆When using the voice menu, press * (star) to return to the main menu.
◆If changes are made to the IP allocation mode, please restart the device to take the changes into account.
implement settings.
◆When entering an IP address or subnet mask, use "*" (asterisk) to replace "." (dot).
For example, to enter the IP address 192.168.20.159 on the keypad, press these keys: 192*168*20*159, use the # (hash) key to indicate that you have finished entering the IP address.
◆ # key to indicate you have finished entering the IP address or subnet mask
◆When assigning an IP address in static IP mode, configuration of the IP address, subnet mask and default gateway is mandatory. In DHCP mode, ensure that the DHCP SERVER is available on your existing broadband connection to which the FWR7302 WAN port is connected.
◆The default LAN port IP address of the FWR7302 is 192.168.1.1 and you should not configure the WAN port IP address of the FWR7302 in the same network segment as the LAN port of the FWR7302, otherwise it may cause the FWR7302 to malfunction.
◆You can enter the password with the phone’s keypad, the key mapping between numbers and letters is as follows:
To enter: D, E, F, d, e, f – press "3"
To enter: G, H, I, g, h, i – press "4"
To enter: J, K, L, j, k, l – press "5"
To enter: M, N, O, m, n, o – press "6"
To enter: P, Q, R, S, p, q, r, s – press "7"
To enter: T, U, V, t, u, v – press "8"
To enter: W, X, Y, Z, w, x, y, z – press "9"
To enter all other characters in the admin password-----press "0",
For example, the password is 'admin-admin', press '236460263'