1. The VLAN page of the Web port is configured here as PVID, where you specify the port's PVID.
For example: here specify WAN: 1, meaning only VLAN; 1 can specify the WAN for untagged, if the other VLAN is configured untagged it will be assigned, as follows:
This is a normal prompt, LAN 1,2,3,4 PVID is 2, the same other VLAN cannot set the corresponding port to untagged
2. For example, you need to send broadcast messages from LAN1, LAN2 can receive, LAN3 cannot receive
1) port vlan_ carries the tag, can be configured as follows :
LAN1 can send broadcast packets, LAN2 can receive tagged packets carrying VLAN 10, if the message VLAN port carries the tag.pcap
2)port vlan_ does not carry a tag.png
LAN1 can send broadcast packets, LAN2 cannot receive any tagged broadcast messages if the VLAN message port is untagged.pcap
