This article presents three methods for making calls when there is no SIP server and you want to make calls with the adapter.

Method 1. Make calls with the call code ***7 on an adapter

Step 1. Go to SIP Account > FXS Settings, select the port you will use, you can use batch settings to select ports in bulk or select them one by one. Enable outbound calls without recording.


Step 2. Go to SIP Account > FXS Settings > Advanced SIP Configuration, disable Only Recv Request From Server et Request-URI User verification.

Step 3. Make calls on the analog phone. Dial ***72#, FXS2 port will ring. Dial ***73#, FXS3 port will ring. Dial ***74#, FXS4 port will ring.

Method 2. Make calls with the Hotline function on an adapter

Step 1. Go to SIP Account > FXS Settings, select the port you will use (Here we select FXS1), Enable outbound calls without recording.

Step 2. Go to SIP Account > FXS Settings > SIP Advanced Configuration, configure the Signal Port to 5060, disable Only Receive Request From Server and User URI Verification.

Step 3. Go to Network > WAN, configure a static IP address on the adapter.

Step 4. Go to SIP Account > FXS Settings > Additional Services, set the Hotline to 192.168.1.107:5061 (192.168.1.107 is the static IP address of the WAN port of the adapter)

Step 5. Configure the signaling port of another FXS port and the Hotline. Here we configure FXS2.

Go to SIP Account > FXS Settings, select FXS2, go to Advanced SIP Configuration, set the Signaling Port to 5061.

Go to Additional services, set the Hotline to 192.168.1.107:5060 (192.168.1.107 is the static IP address of the WAN port).

Step 6. Making calls. When FXS1 picks up, FXS2 rings. When FXS2 picks up, FXS1 rings.

Méthode 3. Passez des appels avec l’adresse IP entre différents adaptateurs.

Step 1. Go to Account SIP > FXS Settings, enable outbound call without recording.

Step 2. Go to SIP Advanced Setup, set the Signal Port to 5060, disable only receive request from server, disable URI request verification, disable Use random SIP port.

Step 3. Perform the same settings on another adapter.

Step 4. Make calls. Dial the WAN IP address of another adapter, then the analog phone on that other adapter will ring.