1. Hardware installation
Step 1. Connect the line port to an analog phone with an RJ‑11 cable.
Step 2. Verify that the SIM card is connected.
Step 3. Connect one of the 4 LAN ports to your computer with an RJ‑45 cable. This device allows you to connect 4 PCs directly.
Step 4. Connect one end of the power cord to the device’s power port. Connect the other end to the wall outlet.
Step 5. Start the device
Step 6. Check the Power and LTE, LAN indicators to ensure network connections.
Note: The WAN port priority is higher than LTE. When LTE is used, the equipment's WAN port should not be connected with a cable.
2. Check LTE status
9.png
"Satus->Information", you can see the LTE status. The connection status is connected, meaning the SIM card is detected and the connection succeeded.
3. GSM calls via LTE
10.png
“Network-->LTE”, enable GSM calling, click Save and Apply. You can then browse the internet and make calls.
Note: our LTE module currently supports GSM calls from SIMCOM.