Sometimes, when using IP phones, ATAs, or routers, the user may encounter issues such as inability to register the SIP account, inability to connect the device to the VPN, or registration problems, or VPN connection issues, and generally to resolve these problems, we ask the user to provide accounts for testing and verification; if that is not convenient, packets are required, but how to trace the packets?
Wireshark ou Hammer Call Anakyze sont deux outils populaires utilisés pour tracer les paquets. Nous prenons Wireshark comme exemple pour montrer à l’utilisateur comment tracer les paquets ici.
1 Please download and install Wireshark on your computer ;
2 Please connect the computer and the DUT (device under test, representing an IP phone or ATA or router here) to the same HUB, and ensure the HUB connects to the existing network.
Note: you must use a HUB to connect the computer equipped with the packet tracer tool and the DUT, otherwise you will not receive the correct packets.
3 Then, open Wireshark, click on Interface List to display the computer's interfaces, and select an interface, usually the local connection. Then click
to start.
4 Run the device, perform tests and check the status in the Wireshark panel, after capturing enough packets, click to stop, then click File → Save to save the packet to your computer.
