Overview
The user may not know how to install and configure the IP phone during the first use. The following briefly describes how to install and configure the IP phone, take a look.
(1) Check the package
In general, the package includes an IP phone unit, a handset and its cord, an Ethernet cable and a universal power adapter; some IP phones may provide basic mounting support and screws for wall mounting. You should check the contents of the package upon receipt; if something is missing, contact the manufacturer or phone supplier.
(2) Assemble the phone
① Plug one end of the twisted telephone cable onto the left side of the phone base.
② Plug the other end of the handset cord into the socket at the bottom of the handset.
③ If you use an external power supply, insert the power cord into the power supply, then plug the power supply into the phone’s base unit.
Note : use only the power supply provided with the phone.
If you need to mount the phone on the wall, you still need:
④ Fixez deux vis appropriées au mur. Laissez un espace de 1/4 du mur. Cela vous permet de glisser les supports de montage sur les vis. Appuyez légèrement pour verrouiller le téléphone en place.
(3) Turn on the phone
① Plug the power adapter into the electrical outlet.
② The LCD screen will first display "Welcome, initializing......" and all phone LEDs will blink.
③ Then the LCD screen will display "Network initialization".
④ After the sequence, the phone will display the date&time on the LCD and line status for the phone, some phone may display the Internet port IP address( if phone can connect to the Internet) on the LCD, too. This means phone started normally.
Note: If the phone does not display this screen, double‑check the installation and connections. If it is incorrect, try unplugging the phone and then plugging it back in. If the display still does not appear, contact your phone administrator or service provider.
Note: The Flying Voice IP601, which has no LCD screen, the user cannot see the phenomena at startup. When you plug the power adapter into the outlet, the LCD screen at the back of the phone flashes, wait about 40‑60 seconds, pick up the handset, and you will hear “Please enter your option, 1 WAN port connection type…”, which means the phone starts normally.
(4) Registration
The user must connect the SIP phone to the Internet before registration.
① Log in to the IP phone's Web interface and go to SIP Account-->Line.
② Activate the line and enter your SIP server's IP address;
③ Fill in the SIP account and corresponding settings.
④ Save changes and restart the phone.
After restarting the phone, the user can check the line status to see if it registers correctly: green indicates a successful registration, red indicates a failure. The user can also log in to the web interface to view the status page.
(5) Make a call
After a successful registration, the user can make calls with the IP phone. Pick up the handset, dial the digits, finish with #, the number will be sent immediately.
(6) Receive a call
Lorsqu’un appel entrant arrive, le téléphone sonne et le voyant de la ligne correspondante clignote. Prenez le combiné ou appuyez sur le bouton SANS‑FONCTION, puis vous pouvez parler à l’appelant.
