The user may encounter the following situation: connect the phone’s WAN port to the office local network, start the phone, the phone obtains an IP address such as 192.168.1.XXX from the network, however, the user cannot access the phone with this IP and the same applies to pinging from the PC command window.
What to do?
Actually, this is because the default IP address of phone's LAN port is 191.168.1.1, when the WAN port gets an IP like 192.168.1.XXX, both the two ports of the phone work in the same IP segment, this will make user can not access the webpage.
The solution is: 1) Disconnect the WAN port from the network;
2) Connect the phone's LAN port directly to the PC ;
3) Connect the phone via the web at 192.168.1.1 and go to Network --> LAN, change the LAN port IP address to 192.168.100.1 or any other address except 192.168.1.XXX ;
4) Connect the WAN port to your local network, then the user can access the phone’s web page using the obtained IP.