1 What are the default settings for SIP phones?
1) WAN port connection type, the default value is DHCP, as illustrated in the following image:
35.png
2) There are two user levels, one in user mode and the other in admin mode. The default username and password for the user account are "user", and for the admin account are "admin".
3) By default, line1 must be enabled and other lines are disabled.
2 : How to reset phones to factory settings ?
There are three methods to reset phones to factory settings, two require a password and one does not.
1) Reset via the WEB interface
① Log in to the IP phones' web page, go to Administration-->Management;
7.png
② Click on factory reset and you will see the following notification: "Please RESTART for changes to take effect!", click restart, all settings will return to default values after restart.
2) Reset via the LCD screen (password required)
① Press Menu and select Advanced.
② Enter the administrator password (the default password is admin), then select Reset to factory settings.
3) Reset via the LCD screen (no password required)
① Press #*06# on the phone keypad.
② Wait for the phone to automatically reset to factory settings.
Note: A hardware reset will erase all phone settings and return it to factory defaults. Do not perform a hardware reset unless you have backed up your settings or can reconfigure them.