The LTE router supports Internet access via a high‑speed connection and a SIM card; by default, the router uses high‑speed Internet, and when it is unavailable, it switches to the SIM card network.
Cet article décrit la redondance réseau entre le réseau haut débit et le réseau SIM.
This article applies to FWR7102, FWR7302
Router configurations
1. Log in to the router’s web interface, open a browser and enter the router’s LAN IP address 192.168.1.1 in the address bar, a login page appears as shown below, the default username and password are admin.

2. Accédez à la page Réseau > Gestionnaire de connexion, la Sélection de la route par défaut sert à définir la priorité du réseau, définissez la priorité pour la connexion WAN, la connexion LTE et le WIFI 2,4 GHz.
The WAN detection probe is the configuration for network failover; when you enable it, set the detection interval and the ping IP (default 8.8.8.8). The device will periodically ping the IP according to the defined interval. If the ping fails after the maximum number of attempts, the device will fail over to the priority 2 connection you have configured. When the priority 1 Internet connection is restored and the device detects a successful ping, it will automatically switch back to priority 1.

