Under certain conditions, we use a primary server and a backup server to maintain system stability. The IP phone will first register with the primary server; when the primary server fails, the backup server takes over and serves as the working server. When the primary server recovers, it becomes the working server again.
Phone configurations
1. Go to Compte SIP > Ligne1 settings page, configure the primary outbound server and the backup outbound server, the Outbound Server is the primary server, and the Backup Outbound Server is the backup server.


2. Access the Advanced SIP Configuration page, and configure the following settings.

Record refresh interval (sec) : The phone will initiate recording with half of this value, it is 1800 by default.
Primary server detection interval: The SIP option interval to detect primary server activity. It is 0 by default.
Maximum number of detection failures: The number of failures of the primary server to respond to the phone's SIP option. When it exceeds this value, the phone switches to the backup server. The default value is 3.
Prefer the primary SIP server : With this option enabled, the phone will return to the primary server when it detects recovery of the primary server.
