The IP Call Authorization feature allows the user to dial an IP address directly without registering the phone on the PBX server.
1. Log in to the phone management page with the phone's IP address.

2. Go to SIP Account > Line, under Advanced SIP Configuration, change the Signal Port to 5060, disable Only Recv Request From Server, Request‑URI User verification and Use random SIP port, enable Allow IP calls.


Note: If your version does not have the Allow IP Calls option, enable Outgoing Call without recording on the same page.

3. Click Save & Apply and restart the phone. Apply the same settings to other phones that wish to make IP calls.
4. Call another phone by entering its IP address, for example 192.168.20.120.
Optional settings: Dial Rule
Dialing the IP address on the phone is not convenient enough, there is a way to dial numbers instead of the IP address. Follow the steps below to set a dialing rule.
1. Go to Phone > Dialing Rule, enable the dialing rule, set the non‑matching policy to Accept, and click Add.

2. Set the rule below, replace the IP address 192.168.20.120 with the number 520.
3. Call another phone by entering the number 520, which means you are calling 192.168.20.120.
Note : It is recommended to set a static IP address on the phone when using the dialing rule. When the phone’s IP address changes, the dialing rule will not work.
