1. The node under the flyingvoice folder is the node of our device.
Configure SIP accounts via remote SNMP
Select the node account; you can configure the SIP account remotely via SNMP.
(1)Line Enable1 = Enable, 0 = Disable, click the Save button in the upper left.
(2) Configurer le serveur proxy
(3) Configure SIP accounts
Après avoir terminé ces réglages, vous pouvez voir les informations d’impression à droite comme ci‑dessous.
Note: The value of certain nodes cannot be changed. For example, the hardware and software preview node of this device cannot be altered, the back of any set indicates that the node is read‑only, indicating that the set is not available.
2. Connect the device to the web interface to verify that the parameter value has been successfully changed.
You can see that line 2 status is recorded.
