Port Forward: Host C and A and B are not in the same network. If host C wants to access host A and B, the Router sets the port forward ,host A and B map to the WAN port of the Router through port. At this time, hoat C can access host A and B via HTTP: // RouterA IP: port.
1.Set Port Forward
Login web GUI,go into”Network-->Port Forward” page to set port forward.
Click Add button,enter Port Range you need to open and the corresponding host IP Address, Protocol optional TCP & UDP, click Apply.After finish those setting,click Save&Apply or reboot device.
Virtual Server: Click the Add button, set the public port to access, enter the private port to be opened and the corresponding host IP Address, Protocol optional TCP & UDP, click Apply. After finish those setting,click Save&Apply or reboot device.
2.TEST
For example: if the router WAN port IP address is 192.168.10.138, the FIP11W web port is mapped to the router WAN port via port forward. Then you can access the FIP11W web GUI via HTTP: // WAN (public network) IP: port number.
