Port forwarding: Hosts C, A, and B are not on the same network. If host C wants to access hosts A and B, the router configures port forwarding, hosts A and B are mapped to the router's WAN port. At that point, host C can access hosts A and B via HTTP://IP‑RouterA:port.
1. Configurer le transfert de port
Log in to the web interface, then go to the “Network-->Port Forward” page to configure port forwarding.
Click the Add button, enter the port range to open and the corresponding host IP address, optional protocol TCP & UDP, click Apply. After completing these settings, click Save & Apply or restart the device.
Virtual server: click the Add button, set the public port to access, enter the private port to open and the corresponding host IP address, optional protocol TCP & UDP, click Apply. After completing these settings, click Save & Apply or restart the device.
2.TEST
For example: if the router's WAN port IP address is 192.168.10.138, the FIP11W web port is mapped to the router's WAN port via port forwarding. You can then access the FIP11W web interface via HTTP : // IP WAN (public network) : port number.
