Decommissioning copper networks is often discussed in general terms—telecom modernization, cost reduction or infrastructure upgrades. But one of the most urgent and operationally sensitive impacts occurs in a very specific environment: elevator emergency communication systems.

For elevator integrators and building owners, replacing POTS is not an IT upgrade. It is a life‑safety requirement.

For decades, elevator emergency phones relied on analog copper lines that provided a simple and highly reliable connection path to emergency response centers. These lines were powered from the central office, allowing them to continue operating even during local building power outages. This reliability established a baseline expectation that modern systems must still meet today.

However, as copper withdrawal accelerates, building owners are increasingly forced to migrate these emergency communication systems to cellular or IP‑based alternatives.

This transition introduces three critical challenges that directly affect elevator deployments.

1. Removing copper eliminates the “always on” assumption

Traditional POTS lines were not just communication channels—they were lifelines independent of power. Once the copper was removed, elevator emergency phones must rely on local power and backup systems.

This fundamentally changes the system design. If the communication device loses power, the emergency path disappears completely.

That is why a backup battery design has become an essential requirement in modern elevator communication systems.

2. ASME A17.1 compliance raises the level

Elevator emergency communication systems in North America must comply with ASME A17.1 safety code requirements, which emphasize reliability, availability, and emergency accessibility.

Bien que les interprétations puissent varier selon les juridictions, l’attente principale reste cohérente :

The emergency communication system must remain operational during power outages and maintain reliable connectivity with emergency response services.

This is where device design becomes critical.

3. The importance of 24-hour backup power

Unlike standard communication devices, elevator emergency phones cannot rely on short‑term backup power. Outages can last hours, and in some cases, emergency response delays can extend operational dependence beyond typical UPS expectations.

That is why the standby capacity 24 h/24 becomes a key design reference.

The devices such as the PR12 are specifically designed for compact elevator installations, with an integrated backup battery and cellular connectivity. Thanks to its small footprint and dual FXS support, the PR12 is widely used in single‑elevator scenarios where space is critical.

For larger or multi-line environments — such as commercial buildings with multiple elevators or integrated security systems — the PR18 offers a scalable approach. With multiple FXS ports, a high-density design, and industrial enclosure options, the PR18 supports not only elevator phones but also fire panels, alarm systems, and other security communication endpoints within a unified architecture.

Beyond hardware: visibility matters

Modern elevator communication systems are no longer static. Building operators increasingly demand visibility into device status, connectivity status, and power conditions.

Thanks to VolaCloud, integrators and building owners can remotely monitor elevator communication devices, ensuring that emergency systems are not only installed but remain continuously operational.

This transforms the emergency communication of elevators from a passive installation into a managed system.

Conclusion

Elevator emergency phones are not just another use case of POTS Replacement—they are one of the most critical drivers shaping the industry's transition.

As copper networks disappear, the requirements for reliability, compliance, and availability have not decreased. They are increasing.

The combination of the PR12 for compact elevator deployments, the PR18 for multi‑line commercial environments, and VolaCloud for lifecycle management represents a new standard for the design, deployment, and maintenance of elevator communication systems in a post‑copper world.