by SteveF, April 21, 2026
Most POTS replacement solutions on the market today support only 1 to 8 PSTN lines. This creates significant deployment challenges in environments such as apartment buildings, universities and senior residences, where dozens, or even more than 100, PSTN lines are required.
In these scenarios, deployments are often divided into two categories :
- Standard lines, managed by conventional VoIP gateways or ATA devices
- Emergency lines, managed by dedicated POTS Replacement devices with backup battery and 4G/5G redundancy
This fragmented approach increases complexity, cost, and maintenance burden.
Flyingvoice Networks' modular gateways AGW128 and AGW32 are designed to eliminate this challenge, enabling large‑scale POTS replacement deployments with a single system.

1. Modular design for flexible configuration

AGW128 features:
- MCU location (main control unit)
- Power module locations
- Battery module locations
- PSTN interface locations (SSU)
Each SSU supports 32 FXS ports, exposed via two RJ21 connectors (1–16 and 17–32), as well as a parallel RJ11 test port to FXS port 1.
This modular architecture allows users to scale flexibly according to project size—reducing initial investment while maintaining easy expansion.
2. Front wiring and hot‑swappable maintenance
All connections — including power — are accessible from the front panel, simplifying installation in a rack environment.
Each AGW128 module is hot‑swappable, allowing maintenance or updates without service interruption. Even the cooling system is modular, with replaceable fan trays that can be serviced without downtime.
3. Dual power design
The AGW128 supports dual power modules with flexible options:
- AC (100–240V)
- DC (48V)
Users can deploy:
- Single power supply
- AC double or DC double
- Hybrid AC + DC
This redundancy greatly reduces downtime risk. In case of failure, alerts can be monitored via volacloud, with optional email notifications for rapid response.
4. Dual battery modules for 24‑hour emergency operation
With two battery modules, the AGW128 can support an SSU (32 PSTN lines) for up to 24 hours.
Critical lines — such as fire alarms and emergency phones — can be grouped on a dedicated SSU and configured in "emergency power mode," ensuring uninterrupted operation during power outages.
5. Environmental monitoring for security

The MCU supports multiple sensor interfaces, including:
- Fire detection
- Humidity
- Infiltration d'eau/inondation
- Door status
This enables real‑time environmental monitoring via volacloud, promoting proactive maintenance and improved operational security.
6. Remote KVM management support
The AGW128 MCU includes:
- RS232 interface (RJ45 connector)
- Reset the interface
- Local management port
It easily integrates with remote KVM systems, enabling efficient remote troubleshooting and control.
7. Multi‑WAN Bonding with SFP support
The AGW128 provides two WAN interfaces :
- 1 × RJ45
- 1 × RJ45/SFP combo
It supports Multi‑WAN failover, ensuring network resilience.
Recommended configuration:
- Primary WAN → client router
- Backup WAN → Flyingvoice LM150 (4G) or T5300 (5G)
Both devices support PoE and can be powered via the 12 V output of the AGW128, ensuring continuous operation during outages.
8. 5 V / 12 V output for external devices
The MCU includes:
- 1 × 5 V output
- 1 × 12 V output
These outputs can power external sensors or PoE injectors. Both outputs are battery powered, maintaining operation even in case of power loss.
9. Modular design compatible between AGW32 and AGW128

For less than 128 lines of POTS Replacement deployments, the AGW32 offers :
- Full module compatibility with AGW128
- Compact enclosure
- Single power and battery module
- 1 SSU slot (32 PSTN lines)
Up to 8 lines can be configured as emergency lines, with a backup capacity of 24 h/24.
10. Learn more or request a sample
Interested in learning more?
Contactez votre représentant commercial Flyingvoice Networks ou contactez notre distributeur, TeleDynamics.
