What is VoLTE?
VoLTE means Voice over Long-term Evolution. It uses IMS (IP Multimedia Subsystem) technology and is a specific type of VoIP service integrated into the LTE standard, allowing users to make voice calls while using the LTE data network simultaneously.
VoLTE is specifically designed for 4G LTE networks and is available on both LTE and 5G mobile communication technologies. U.S. telecom providers shut down 3G networks several years ago and maintain both 4G LTE and 5G networks simultaneously. Clearly, LTE will remain the dominant technology for a long time to come.

ما هي الفروقات بين VoLTE و VoIP؟
VoIP, we are familiar with this protocol, which is a telephony technology that enables voice calls over an internet connection instead of a POTS line or any physical connection. Both VoIP and VoLTE are designed to provide high-definition voice over IP networks, and there are several differences as follows:
وسائط الشبكة
VoLTE operates exclusively on 4G LTE and 5G cellular networks. According to VoLTE voice quality control, there is a dedicated bandwidth for voice calls. Compared to VoLTE, VoIP can run over any internet connection, including Wi‑Fi, broadband, or mobile data networks.
ترميز الصوت
The encoder (codec) converts an analog audio signal into an encrypted digital signal at the transmitter and then decodes the digital version back to analog at the receiver. Encoders are designed to provide high‑quality audio and efficient encoding, while masking packet loss in harsh radio channel conditions. Especially in VoIP, the situations are more complex. Each encoder has different audio quality and requires different bandwidth and processing.
الترميزات المتاحة لخدمات الصوت المتنقلة. بالإضافة إلى ذلك، ترميز Enhanced Voice Service (EVS) هو الأحدث الذي تم تقديمه في إصدار 3GPP 12
- معدل كامل محسّن (EFR)
- AMR Narrowband (AMR-NB)
- AMR Wideband (AMR-WB)
- AMR-WB الموسع (AMR-WB+)
- خدمة الصوت المحسنة (EVS)
The most common VoIP codecs are:
- G.711: G.711 is considered the best codec format for interacting with the PSTN landline network. G.711 supports limited frequencies between 300-3,400 Hz.
- G.722: هذا الترميز واسع النطاق يقدم معدل بت عالي مع متطلبات عرض نطاق كبير، ويدعم من 50-7000 هرتز – قادر على صوت HD
- G.722.2 (AMR-WB): This wide‑band VoIP codec can switch between 48, 56, or 64 kbps rates, depending on the available bandwidth of the phone network.
- G.729: يقدم G.729 جودة صوت ضيقة النطاق مع معدل بت منخفض—فقط 8 كbps. يعني معدل البت المنخفض أن هذا الترميز يستهلك أقل عرض نطاق من أي ترميز آخر في هذه القائمة.
- Opus: a wide‑band codec, supports Opus from 50‑20 000 Hz with noticeably higher sample rates. This codec is also flexible, with a bitrate ranging from 6‑510 Kbps and bandwidth adapting to network availability.
حالة التشغيل
When using VoLTE devices, it is required that the device supports VoLTE functionality and a VoLTE-compatible SIM card. Configuring VoLTE is very simple, and people can use it directly as they did with landlines or mobile phones in the past. The configurations are implemented on the operator side.
VoIP functions are typically divided into on‑premises (on‑site) and cloud (in‑the‑cloud) deployments. Take Cloud PBX as an example. First, ensure VoIP devices can access the Internet. Then assign SIP accounts to VoIP devices from Cloud PBX, and have the devices register those accounts with Cloud PBX. If the device needs to dial any direct number, Cloud PBX must provide an additional SIP trunk or PSTN addresses, which will also incur extra costs.
يبدو أن شرط التشغيل لـ VoLTE أبسط.
الموثوقية
Both technologies rely on VoIP, meaning that call quality and reliability are heavily affected by the end‑user network environment. When VoLTE is used on mobile devices, although LTE coverage is already wide, call quality may still be affected while on the move. If VoLTE devices are used in fixed locations, such as VoLTE phones, call quality and reliability can be guaranteed at a much higher level.
يقدم VoIP مجموعة واسعة من خيارات الوصول إلى الشبكة، بما في ذلك Wi‑Fi، والنطاق العريض، والخلوي، وكل منها يتمتع بجودة شبكة مختلفة. بشكل عام، الافتراض البسيط بأن VoIP أكثر تقلبًا من VoLTE غير صحيح؛ استخدام المعدات في موقع ثابت يكون أكثر موثوقية من استخدامها في حالة متحركة.
القابلية للتوسع
ستحتاج أجهزة VoLTE إلى استخدام بطاقات SIM، سواء كانت بطاقات مادية أو eSIM، والتي تكون علاقة واحد لواحد. يقدم VoLTE قابلية توسع فائقة للاتصالات الطارئة بفضل تكامله مع الشبكات الخلوية. مع توسع تقنية 5G، ستنتقل الأجهزة المدعومة بـ VoLTE بسلاسة إلى شبكات أسرع وأكثر موثوقية.
VoIP solutions offer unparalleled scalability, making them suitable for small startups and enterprises. As companies grow rapidly, team members can quickly upgrade VoIP systems by adding users or new features to meet changing needs.
اعتبارات التكلفة
VoLTE charges voice services according to the strategy of telecom operators. VoIP charges are usually based on service fees, which can be based on call duration or a full bundle.
بشكل عام، وظائف VoLTE وVoIP أكثر توفيرًا للتكلفة على المدى الطويل مقارنة بأنظمة POTS التقليدية. متطلبات الصيانة المنخفضة، وتكاليف التشغيل الأقل، وإطالة عمر المعدات تسهم في توفير كبير مع مرور الوقت.

Be careful when choosing a solution to replace POTS lines
POTS over VoLTE and POTS over LTE are similar but designed for two different scenarios. POTS over VoLTE means that voice data from POTS devices is transmitted over a VoLTE channel. POTS over LTE is known as transferring POTS data over an LTE network, but the truth is that the data format is under a VoIP frame.
In my view, both technologies appear to be alternative solutions to replace POTS lines. This is partially true. When choosing between VoLTE and VoIP as a replacement for POTS lines, it is essential to evaluate the specific business needs, existing infrastructure, and long‑term communication goals.
في بعض سيناريوهات التطبيقات الصوتية فقط، مثل مكالمات الطوارئ الحياتية، استبدال الهاتف التناظري، وهاتف المصعد، كلاهما لهما مزايا وصعوبة الاستبدال نسبياً قليلة.
But when facing applications such as alarms, modems, fax, etc., VoLTE encounters more issues. Because VoLTE audio encoding requires more compression, the failure rate of alarm, fax, and modem calls will increase.
VoLTE is managed by telecom operators, so it is difficult to add features to VoLTE to solve alarm, fax, and modem call issues. In this case, VoIP technology is more flexible and open to secondary development. As long as the development is compatible with VoIP platforms, there is a way to improve the performance of alarms, fax, and modem calls via VoIP.
لماذا Flyingvoice
After more than 10 years of development, Flyingvoice has rich industrial experience in POTS solutions that provide both VoIP and VoLTE, and we fully understand customers’ needs for POTS line replacement. Flyingvoice develops a specific solution inside the ATA to correctly process the original analog signal (targeting alarms, fax, and modem calls) and reduce failure rates. This is very promising and keeps alarm, fax, and modem calls running in the traditional way as they were in past decades.
Flyingvoice provides comprehensive equipment for replacing POTS lines. First, we offer a POTS box that includes an industrial LTE router LM150 for internet access, a backup power bank, and an ATA PR08 gateway to provide traditional dial tone for legacy devices.

إذا كنت تريد حلاً أكثر إحكامًا لدينا خيار أفضل، جهاز استبدال خطوط POTS شامل - LM152. يدعم الميزة الرئيسية التي يقدمها POTS Box (PR08 و LM150)، كما يدمج VoLTE و VoIP في الوقت نفسه. إنه مغير قواعد اللعبة لسوق استبدال خطوط POTS.
With best regards, we want to use our years of experience to help you transition to VoIP smoothly and reliably. Don’t wait until the last minute; it is wise to take action with Flyingvoice today!
