Traditional elevator telephone service

The traditional elevator telephone service operated only on analog copper telephone lines. The existing wiring starts from the machine room, runs along the travel cable, enters the elevator cabin, and then connects to the central monitoring station.

An elevator phone is designed to provide a direct communication line to a central monitoring station, allowing people to call for help in an emergency. Most elevator phones are equipped with a speaker and microphone so that the person on the other end of the line can hear what is happening in the elevator.

When a person in the elevator needs assistance, they can use the handset or the hands‑free push button to initiate an emergency call to the available reporting center 24 h/24. The center can speak to the person in the elevator, assess the situation and dispatch appropriate help if necessary.

VoIP usage challenges in elevator phone systems

With POTS line costs steadily rising among telecom operators, and lack of maintenance for existing equipment POTS line, it is becoming increasingly difficult to maintain elevator emergency service without interruption. Voice over IP (VoIP) is developing more and more, especially for commercial use. Although ideal for general building telecommunications, some challenges remain when attempting to use VoIP with emergency telephone systems.

Regularly, people inside the elevator cabin could not hang up the phone, because a single push‑button initiates the call and once the emergency is released, the 24 hours The reporting center with staff will terminate the call and the elevator phone will also end the call. This behavior works well with old POTS line Because a dedicated circuit is established between the two phones, regardless of which participant hangs up, the circuit remains closed.

When we replace POTS Line with ATA gateway When the handset is connected to a hands‑free speakerphone, the call may not end as expected when the far end hangs up. This problem does not exist on IP phones or ATAs operating with an analog telephone, the two devices having a “croc” to manually end the call and redial, but the elevator speaker unit does not have one.

In this case, ATA must send the WINK signal, indicating to an automated telephone device such as a speaker or answering machine to hang up.

Additionally, traditional POTS line will maintain telephone service when the elevator cabin power is off and 911 can easily identify your location thanks to location information published during the call.

Advantages of the Flyingvoice POTS Box

Fortunately, Flyingvoice offers POTS Box solution for transitioning elevator phones to VoIP. In general, Flyingvoice has several years of experience and our North American partner has proven that our ATA works well in elevator telephone communication. The box also contains an external battery for 24‑hour backup to ensure conversation time in case of power outage.

Furthermore, there is a service called Enhanced 911 (E911), which is part of the 911 system that automatically links a location to the call. VoIP service providers activate E911 by asking customers to set a physical address that appears when they dial 911 on their phone or VoIP device.

Flyingvoice POTS Box offers features and benefits that are not available with a traditional fixed line. It also reduces monthly cost thanks to the VoIP solution. Upgrade your elevator telephone lines now with Flyingvoice technology. Choosing a reliable, compliant system and working with an experienced manufacturer to ensure a smooth transition is essential for your business success.

For more information on POTS Replacement, please visit Flyingvoice POTS Replacement Solution.