New backup mode with the firmware for Flyingvoice FIP1X series IP phones is arriving! Get ready now for faster data recovery when firmware updates fail during normal operation. With several improvements, it offers an even better user experience.

What is the backup mode?

It offers recovery when the firmware update fails during normal operation, for example if the IP phone shuts down during the update, it can help you recover your data and complete the firmware update.

New features :

1. Adding more details to the LCD display, such as VLAN ID, WAN and LAN port IP addresses, and update notifications.

2. Ajout de la possibilité d'accéder à l'interface web depuis le port LAN avec l'adresse IP (LAN prend en charge DHCP, il attribuera une adresse IP à l'ordinateur connecté au port LAN)

3. Adding the ability to access the web interface by enabling the VLAN.

3. Adding support for Provisioning and TR069, when a Provision or TR069 update fails, it can help you complete the Firmware update without interruption.

Previous versions :

There are only two ways to access the web interface to retrieve your data: disable the VLAN and connect to the WAN port with an IP address. The LCD display simply shows the IP address. Note that the latest recovery mode version is v0.0.9. The latest IP phone includes this recovery mode version, otherwise you will need to update it manually.

For optimal performance, we strongly recommend updating your backup mode to the latest version v0.0.9.

How to use the backup mode ?

LCD status display

1. Update the firmware via the web interface normally.

2. Unplug the power cable during the update to trigger the recovery mode

3. Restart the SIP phone and the LCD display shows the following :

(VLAN ID, WAN and LAN port IP address, update notice).

Web

Firmware update failure via Web interface, recovery in rescue mode

1. Disable or enable the VLAN to access the web interface.

2. Update the firmware via the web interface normally.

3. Turn off the IP phone to trigger the backup mode.

4. Connect to a WAN or LAN port and enter the IP address to update the Firmware.

5. When the IP phone successfully updates the firmware, it can resume normal operation.

Firmware Update via Provision and TR069 failed, recovery from rescue mode

1. Connect to FACS or TR069 to update the firmware.

2. Unplug the power cable to trigger the backup mode.

3. The IP phone will continue to receive the update file URL.

4. When the IP phone successfully updates the firmware, it can resume normal operation.

Note: The default Provision parameter is HTTPS, but you can configure your own HTTP, FTP, or TFTP server.

Applicable to Flyingvoice FIP1X series SIP phones below: