Les lignes POTS sont en cours de suppression

Plain old telephone service (POTS) is the original analog telephone line system used since the 1880s. In 2019, the FCC’s POTS line tolerance order 19-72A1 marked the end of life of traditional analog POTS line systems. AT&T and Verizon announced they will begin to discontinue service in certain areas and that the cost of an existing POTS line is rising rapidly.

Increasing cost

What is the option for an alternative solution?

It is absolutely unwise to keep the existing POTS line for your business. The POTS line is becoming obsolete and its cost is rising. Even if you can afford the increasing bill, the maintenance service from a telecom provider will become increasingly difficult. It takes more time and money to restore an obsolete system.

However, large‑scale replacement of original terminals with digital terminals will entail a significant budget, internal engineering resources, full support from central system vendors, etc. This will introduce additional risks and a risk of business interruption.

By considering minimal changes to the current system, acting to replace the "old copper line" with "wireless" is a more promising solution. It is a trend for the coming years, and we have observed new POTS replacement readers have appeared on the market in the last two years.

Challenges in replacing the POTS line

If we decide to replace the POTS line with digital communication, we will face some challenges. Here, we need to know the advantages and features that the POTS line has provided us over the past decades.

POTS line

  • First, the POTS line uses a dedicated network and converts voice into electrical signals, it powers the analog terminals simultaneously. It is very reliable even during the power outage stage. Modern digital solutions require external backup power for terminals in case of power failure.
  • As we know, the POTS line uses a dedicated physical network for data transmission, while modern digital communication uses IP-based packet switching technology and data travels via the Internet. Compared to a dedicated network, the digital solution must solve network communication problems, such as congestion, latency and network failure.
  • The POTS line uses circuit switching technology and is not required for data compression during transport. Digital communication converts voice into digital signals; it is inevitable to use a voice codec to digitize the signal, which leads to protocol incompatibility issues. For example, fax, modem calls and alarm panels cannot operate correctly on the current IP-based network, as IP packets may be lost or distortion caused by voice compression results in a high failure rate.

Competitors and solutions available in this market

Form 1: POTS Box

It is a common combination on the market, a NEMA‑sealed box containing an industrial LTE router, an ATA (FXS gateway) that provides VoIP features, and a mini‑UPS for power backup. In this type of combination, due to the local network access certification for LTE routers among U.S. operators, most providers will choose industrial routers suitable for domestic use in the United States. However, the cost of this type of router is relatively high, including the high cost of the device management platform. Therefore, to balance the overall box replacement for POTS, most providers can only choose to use a very simple and low‑cost ATA in their solution. In this case, the performance and stability of the ATA face major challenges.

Form 2: all-in-one router

Plusieurs participants ont leur produits tout-en-un lancé sur le marché, qui comprend l'accès Internet LTE, la fonctionnalité ATA et des batteries de secours intégrées dans un seul appareil. Ils offrent tous des solutions clés en main, y compris des cartes SIM pour l'accès Internet LTE, ainsi que la gestion des comptes DID/SIP, des données vocales et de la gestion des appareils. Ces avantages d'un service complet permettent d'économiser votre temps de construction de solution, mais les avantages et les inconvénients sont également relatifs. Dans ce cas, ils facturent relativement frais de service élevés, et vous ne pouvez que acheter un ensemble complet de services d'entre eux, qui est pas convivial pour ceux qui souhaitent intégrer leur ressources de carte SIM propres ou intégrez leurs plateformes VoIP familières dans leur système.

Form 3: VoLTE device

VoLTE appears as an alternative solution for POTS line replacement as well. Here we have seen a few simple VoLTE devices on the market that do not support VoIP functionality. They can simply replace the voice service of the POTS line; due to VoLTE limitations, they do not handle alarm calls, fax, and modem data well, but remain a suitable alternative for emergency call scenarios.

Overall, the different product forms in this market have their appropriate application scenarios. Depending on the various legacy analog devices connected simultaneously and the various usage scenarios, there is no single product that can meet all the needs of POTS replacement. Therefore, more flexible solutions from Flyingvoice can win market favor.

Why Flyingvoice

After more than 10 years of development, Flyingvoice has gained extensive industrial experience in VoIP Solutions and POTS Replacement. We fully understand customers' needs for POTS replacement.

Si vous avez la capacité technique de construire votre propre solution de remplacement POTS, Flyingvoice sera le meilleur choix pour votre produits matériels. Actuellement, Flyingvoice a plusieurs propositions pour les produits matériels,

1. UPS LM150+PoE supported

LM150 is an industrial router with VoLTE support. In addition to providing stable LTE Internet access, it also has a FXS port that provides VoLTE services. This router can be powered via PoE, paired with an UPS that supports PoE output. The LM150 and UPS function as a simple, tailored POTS replacement solution that can be applied to emergency phone applications, e.g., replacing an elevator phone line.

Flyingvoice LM150 LTE Modem

LM150&PoE UPS

2. LM150+PR08+Power Bank, a typical combination

The LM150 router can be paired with the PR08 ATA gateway and provides a reliable network connection to PR08 (IP passthrough). The PR08 is the central device of our solution. To be compatible with different applications, we have developed several application protocols, such as Contact ID, V.150.1 modem, as well as fax protocols T.38 and T.37. It properly handles the original analog signal (intended for alarm, fax, and modem calls) and reduces the failure rate. It is very promising and keeps alarm, fax, and modem calls working in the traditional way as they did decades ago.

PR08 supports a battery management function, two Type‑C power bank interfaces that can be recharged via an external battery during a power outage, and the PR08 will manage the battery charging cycle when it operates on the main power. Two 65 W batteries can extend the system to 24 hours of total backup power.

LM150+PR08+Power Bank

3. All-in-one compact LM152

If you want a more compact device, this is the right one fits your system, we will recommend a All-in-One POTS Replacement Device – LM152. It supports the main features that the POTS box (PR08 and LM150) includes, e.g., built‑in LTE modem, battery, and classic ATA features. It also integrates VoLTE and VoIP simultaneously. It’s a game‑changer for the POTS Replacement market.

Flyingvoice LM152 router

LM152

Whatever equipment you promote, we can find the right gear for your POTS replacement solution. In the meantime, we offer a free trial account for Flyingvoice AWS Cloud device management Kind regards, We want to leverage our years of experience to help you migrate your POTS Replacement to VoIP or VoLTE smoothly and stably, don’t wait until the last minute, it is wise to act now with Flyingvoice today!