Context

Modem data via POTS lines are common uses in various scenarios. One of the most popular scenarios is the point of sale. PoS terminals are everywhere. The most common locations include retail stores such as clothing boutiques, department stores, supermarkets, restaurants, etc.

terminal PoS

Modems enable the point‑of‑sale computer to communicate with banks or credit card processing centers to obtain approval or denial of a transaction. The modem also sends daily transaction totals to other company sites, such as the headquarters.

The modem data technology via the POTS line is very démodé technology. However, it remains active today due to three major reasons, minimal data consumption, and speed requirements, reduced cost associated with installation, and security of on-demand connection.

Time changes and new technologies pose challenges

Even though we know that POTS lines are suitable for this type of application, the POTS line cost increases, and older copper line networks make this solution harder to keep alive. It is wise to consider digital communication, VoIP offers more flexibility and easy communication via the Internet.

VoIP

However, you may encounter issues when replacing the modem dial‑up call with VoIP. The VoIP account is regularly registered on the Cloud PBX, and data transfer via Internet passes through the SIP trunk or PSTN to the remote headquarters. The telecom provider’s network quality is very sensitive for modem calls, because the VoIP mechanism allows loss of a few packets during Internet transmission; the encoding of the analog signal and decoding of the digital signal affect the raw modem data. G.711 encoding is required, and only a high‑quality network can guarantee complete transmission.

V.150.1, also known as IP Modem

To solve the modem data call problem via the Internet, an alternative to G.711 is the use of ITU‑T V.150.1, also called Modem on IP, which demodulates and modulates the modem data to gateways, transmitting data via IP between them.

The V.150.1 gateway is a standards‑based implementation that integrates reliable and efficient transport of any type of modem signal across IP networks using Simple Packet Relay Protocol (SPRT).

Approval of Flyingvoice features

Flyingvoice ATA tel such as PR08 FXS gateway supports V.150.1 feature that can be enabled via the web interface. Currently, PR08 supports low‑speed data calls of VoIP; if the other end does not support the V.150.1 function, simply place two PR08s at each end to replace the PSTN line, then the modem can dial as before.

connection topology

After more than 10 years of development, Flyingvoice has gained rich industrial experience in VoIP and POTS Replacement Solutions. We fully understand the customers’ needs for POTS Replacement. If you have the technical skills to create your own POTS Replacement solution, Flyingvoice will be the best choice for your hardware products.

If you have questions or would like to learn more, feel free to visit our website at flyingvoice.com.