Introduction to POS systems

Point de vente (POS) These are devices that allow merchants to process payments and record transactions. It is one of the most widely used applications by consumers on a daily basis. Every time you pay with a credit/debit card, there is a modem (dial‑up or broadband) behind it, transmitting data and quickly returning an approval or denial signal. And in the case of dial‑up solutions, the associated costs will be significantly lower.

Benefits of POS systems with telephone connectivity

Composition POS systems are easy to install and typically only require a telephone line to start accepting payments. With its simple deployment and cost-effective performance, the telephone-connected POS system has become the most widely used POS system in the United States.

Before telecom providers raise the cost of POTS lines, the modem is ideal for applications where an "always‑on" connection is not required, such as minimal data and speed requirements, consideration of installation cost, and the need to secure an on‑demand connection.

First, the newest modem will transfer data up to 56 Kbps, but the POS systems do not always require this type of speed. Transactions are generally low volume and may only need 300 bps or up to 2.4 Kbps.

Therefore, for small data volumes and minimal throughput, the dial‑up solution can be much cheaper to implement. Additionally, night transaction summaries can be scheduled outside peak hours, further saving money.

Moreover, on‑demand connectivity provides better security. The high‑speed "always on" connection means that the computer and POS system remain constantly connected to the Internet, which increases the risk of hacking and security breaches. With the POS in dial‑up mode, the computer only connects to the Internet for the time needed to complete the transaction, significantly reducing the risk of intrusion.

Even though we know that POTS lines are suitable for this type of application, the rising cost and decommissioning of the old copper infrastructure make this solution increasingly difficult to maintain. We need to turn to next‑generation digital communication, for example, Voice over IP (VoIP), which offers more flexibility and a simple communication method via the Internet.

Potential issues with cash registers on VoIP

Cependant, vous pouvez parfois rencontrer des problèmes lorsque vous utilisez un POS machine avec VoIP. Une machine POS peut échouer à se connecter ou ne pas trouver de numéro valide pour terminer une transaction.

1. Regularly, when you switch to POTS replacement services, the VoIP account will register to Cloud PBX and transfer data via Internet/SIP trunk/PSTN to the remote headquarters. The carrier network’s quality of service is highly sensitive to a modem call; only good quality can guarantee complete transmission.

2. Make sure that the POTS replacement ATA gateway offers good support for baud rate negotiation. The POS modem call requires low baud rate transmission, appropriate baud rate support is the fundamental element for a successful modem call.

3. Verify that POS machines are preconfigured with a 10‑digit number or 7‑digit number; some devices are preprogrammed to dial only 7‑digit numbers, 10‑digit numbers may fail. To ensure a successful connection, remove old numbers from the dialing pool.

Flyingvoice POTS Replacement Solution

With years of experience on POTS Replacement Solution, Flyingvoice POTS enclosure provides stable wireless cellular Internet access or an Internet connection via your current broadband and a backup battery in case of power outage. Flyingvoice ATA gateway delivers dialing tone for legacy modems, it is well designed to support modem-based applications (Point of Sale, vending machine, public utilities, vending machines, etc.). Move your scene with Flyingvoice POTS Replacement to ensure uninterrupted activity!